The servo reverse switches are used to change the direction that a servo responds to a control
input from the transmitter (each stick). After using the reversing function, check all the controls
on the model to be certain they are operating in the correct direction and that you did not
inadvertently reverse a servo other than the one intended. Reversing the wrong servo (and not
checking the response of the controls before each flight) may be the most common cause of a
crash!
*Note that the direction of the aileron servo is easily mistaken.
①
Push
Slide the battery cover off the
transmitter in the direction of
the arrow in the figure.
③
SERVO REVERSING
②
④
CH1
CH2
CH3
CH4
CH1-6 Reverse Switch
Battery Cover
⑤
CH5
CH6
Mixing Switch
19