Connecting Navigation Equipment - JRC JMA-7710-6 Instruction Manual

8.5.3.7 Connecting Navigation Equipment

This function is used to connect and set the GPS.
1. Press the
Procedures
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
Exit
Exit 6. Press the
When "183" is selected, the talker ID is displayed on the bottom of the screen in the
plot mode after data is received from the navigation system. Ask the navigation system
manufacturer for the ID.
Initial set #2
INIT
SET #2
1. BEARING ADJUSTMENT
2. RANGE ADJUSTMENT
3. TUNE ADJUSTMENT
4. SETTING OF PRF
5. PM ADJUSTMENT
6. DATA INPUT FORMAT
7. INITIALIZING GPS MENU (STBY)
8. SETTING DGPS MENU (STBY)
SUB
key to open the SUB MENU.
MENU
9
key twice to open the INIT SET #2 menu.
6
key to select "DATA INPUT FORMAT".
6
key several times to select either "183", "JRC" or "180".
ENT
key to confirm the setting.
SUB
key.
MENU
23
183 JRC 180
8 – 32
8.5
0. PREV
9. NEXT
8