Erasing The Storage Of Target Past Track By Specifying A Color - JRC JMA-7710-6 Instruction Manual

5.10.6 Erasing the Storage of Target Past Track by Specifying
a Color
Attention
This setting is valid when target past track function is ON.
This function erases the storage of target past track with the specified target past track color.
The erased target past track is not reproduced.
Erasing target past track
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. When pressing the
appear.
7. Press the
Exit 8. Press the
Canceling erase
Press the
7 of erasing target past track to stop the erase of target past track.
CLR TRACK
CLR TRACK
1. CLEAR TRACK COLOR
2. CLEAR TRACK NUMBER
3. CARD 2 TRACK DISP
SUB
key to open the SUB MENU.
MENU
7
key to open the ATA TRACK menu.
9
key to open the CLR TRACK menu.
1
key to select "CLEAR TRACK COLOR".
1
key to select target past track color.
ENT
key, the confirmation display of erase will
ENT
key to erase the storage of target past track.
SUB
key to close the CLR TRACK menu.
MENU
CLR
key instead of the
ALL WHT SKY BLU GRN
ALL 0 1 2 3 4
0
5 – 36
ENT
key in the operation procedure
0. PREV
YEL PNK RED
5 6 7 8 9 OTHER
5.10
5