Setting Target Past Track Display - JRC JMA-7710-6 Instruction Manual

5.10.4

Setting Target Past Track Display

Attention
This setting is valid when target past track function is ON.
This function continues storing target past track irrespective of this setting.
It sets the display non-display of target past track (up to 10 target) with the specified target past
track number.
If all are set, the display non-display of the track that is individually set to target past track numbers
0 to 9 are invalidated.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
The display non-display of target past track with the specified target past track number
is switched. (The item indicated by an underline is displayed.)
Exit 6. Press the
ATA TRACK
ATA TRACK
1. TRACK FUNCTION
2. TRACK COLOR
ALL 0
WHT SKY
3.
4. TRK DISPLAY
5. TRK MEM INTERVAL
SUB
key to open the SUB MENU.
MENU
7
key to open the ATA TRACK menu.
4
key several times to select "TRK DISPLAY".
4
key to select target past track number.
ENT
key for fix this setting.
SUB
key to close the ATA TRACK menu.
MENU
OFF ON
1 2 3 4
BLU GRN YEL
ALL 0 1 2 3
OFF 10SEC 30SEC
5 – 34
5 6 7 8
PNK RED WHT WHT WHT WHT
4 5 6 7 8 9
1MIN 3MIN 5MIN
5.10
5
0. PREV
9. NEXT
9 OTHER
OTHER
10MIN