Simulation; (Checking The Ata According To A Pseudo Target) - JRC JMA-7710-6 Instruction Manual

Simulation

5.13

(Checking the ATA according to a Pseudo Target)

To check the ATA, this function displays a pseudo target on the screen.
1. Set GAIN to the minimum.
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
7. Press the
The radar image will disappear, a pseudo target is displayed in the zero degree direction,
and the XX character will appear under the screen.
Exit 8. Press the
A target is displayed in 3 miles for STOP, 4 miles for NEAR, and 2 miles for FAR.
Selecting OFF returns to the normal radar image.
ATA #2
ATA #2
1. AUDIBLE WARNING
CPA TCPA
LOST TARGET
2. DISPLAY OF CPA RING
3. ATA TEST MENU

4. SIMULATION

SUB
key to open the SUB MENU.
MENU
5
key to open the ATA #1 menu.
9
key to open the ATA #2 menu.
4
key to select "SIMULATION".
2
key to select "OFF", "STOP", "NEAR" or "FAR.
ENT
key to fix this setting.
SUB
key.
MENU
OFF ON
OFF ON
OFF ON
OFF STOP NEAR FAR
5 – 42
5
0. PREV