Writing Target Past Track To Card 2 - JRC JMA-7710-6 Instruction Manual

5.10
5.10.9

Writing Target Past Track to Card 2

Attention
This setting is valid when target past track function is ON and is set in the composite mode and
plotter mode.
Write target past track by entering 4-digit file number that is not stored on the memory card.
1. Press the
Procedures
2. Press the
3. Press the
4. Insert the memory card to the slot of card 2.
5. Press the
6. Press the
7. Press the
8. For writing confirmation, press the
To stop writing, press the
Exit 9. Press the
SUB
key to open the SUB MENU.
MENU
6
key to open the PLOTTER menu.
5
key to select "MEM CAPACITY
key twice to select "COPY INSIDE → Card 2".
2
9
0
to keys to enter a 4-digit file number.
ENT
key.
CLR
key for the writing confirmation.
SUB
key.
MENU
5 – 39
COPY MEM MENU".
ENT
key to execute writing.