Adjusting Position By Changing Latitude; Longitude Information; From Gps (R+P And Plotter Modes) - JRC JMA-7710-6 Instruction Manual

8.5

8.5.7.3 Adjusting Position by Changing Latitude

from GPS (R+P and Plotter Modes)

Since this adjustment changes such data as the stored track, only our service personnel is allowed to use this
function.
1. Follow procedures 1 and 2 in subsection 8.5.7.1 to open the INIT SET #3
Procedures
menu.
2. Press the
3. Press the
latitude) using numeric keys (
key.
4. Enter an adjustment value for E (east longitude) using numeric keys
0
(
(Use the
longitude or west longitud.)
1. Follow procedures 1 and 2 above to select "LAT
Cancellation
2. Press the
0
3. Enter "0" to an adjustment value for E using the
ENT
This cancels position adjustment.
Exit 5. Press the
Init set #3
INIT
SET #3
1. SHIFT COAST LINE #1
2. SHIFT COAST LINE #2
3. LAT LON CORRECTION
4. CHART CENTER POSITION
5. DATE
6.
3
key to select "LAT
3 ENT
key or
9
to ) and press the
key for selecting the north latitade, south latitude, east
3
key, enter "0" to an adjustment value for N using the
ENT
key and press the
key.
SUB
key.
MENU
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 0˚ 00.000'
E 0˚ 00.000'
OFF UTC
8 – 51

Longitude Information

LON CORRECTION".
key, enter an adjustment value for N (north
9
0 to ) and press the
ENT
key.
LON CORRECTION".
key.
0
LOCAL
ENT
key and press the
0. PREV
9. NEXT