Setting Vector Display - JRC JMA-7710-6 Instruction Manual

3.3

3.3.23.6 Setting Vector Display

Attention
This function is used to set the plot display mode (true/relative).
The default setting is the true vector mode.
In the true vector mode, the own ship vector is displayed with a thick line.
The vector mode information is always displayed on the scree.
1. Press the
Procedures
Procedures
2. Press the
3. Press the
4. Press the
to the true or relative mode.
5. Press the
or
Press the
Procedures
Procedures
The vector display changes to the true or relative mode.
Main menu
MAIN MANU
1. RADAR TRACK BRILL
2. RR VRM EBL BRILL
3. ATA BRILL
4. GRAPHIC DATA BRILL
5. PROCESS
6. IR
7. FLOATING EBL
8. VECTOR
9. GRAPHIC DATA DISP OFF
MAIN
key to open the MAIN MANU.
MENU
8
key to select "VECTOR".
8
key to select "TRUE" or "RELATIVE".
ENT
key to confirm the setting. The vector display changes
MAIN
key.
MENU
VECT
key to select "TRUE" or "RELATIVE".
TRK
G
[DAY1]
G
[DAY1]
G
[DAY1]
G
[DAY1]
OFF PROC1
OFF IR1
OFF ON
TRUE RELATIVE
3 – 47
PROC2 PROC3
IR2 IR3