JRC JMA-7710-6 Instruction Manual page 259

9. Press the
10. Press the
After the setting is properly transmitted to the beacon receiver, the display for indicating
that transmission is completed appears.
If transmission fails, the display for indicating that transmission error occurs appears.
In this case, check the beacon receiver and cables.
Exit 11. Press the
Exit
Setting DGPS DGPS Status
SETTING DGPS DGPS STATUS
Press an item number key.
0. PREVIOUS NEMU
1. MODE
2. FREQUENCY
3. BAUD RATE (BPS)
4. SET DATA
5. SEND DATA
6.
7.
8.
9.
STATUS BEACON RCV CONNECT
FREQUENCY
BAUD RATE
RSSI
To close this menu, Press (SUB MENU) key.
5
key to wait to send data.
ENT
key to send data.
SUB
key.
MENU
AUTO MANUAL
xxx. x kHz
50 100 200
1kHz 500Hz
–––––––– kHz
––––– BAUD
–––––
8 – 42
8.5
8