Specifying Target Past Track - JRC JMA-7710-6 Instruction Manual

ATA TRACK
ATA TRACK
1. TRACK FUNCTION
2. TRACK COLOR
ALL 0
WHT SKY
3.
4. TRK DISPLAY
5. TRK MEM INTERVAL
5.10.2

Specifying Target Past Track

Attention
This setting is valid when target past track function is ON.
It can specify up to 10 target past tracks.
Even when target past track is released, the tracking of a target is continued.
Specifying target past track
1. Press the
Procedures
2. Press the
3. Align the + cursor to the target being tracked for which target past track
is not displayed and press the
Releasing target past track
1. Press the
Procedures
2. Align the + cursor to the target being tracked for which target past track
specification is to be released and press the
Besides, use the
to be released and press the
OFF ON
1 2 3 4
BLU GRN YEL
ALL 0 1 2 3
OFF 10SEC 30SEC
TGT
key.
DATA
9
0
to keys to enter target past track ID.
TGT
key.
DATA
0 9
to
CLR
5 – 32
5 6 7 8
PNK RED WHT WHT WHT WHT
4 5 6 7 8 9
1MIN 3MIN 5MIN
ENT
key.
CLR
key.
keys to enter target past track number
key.
5.10
0. PREV
9. NEXT
9 OTHER
OTHER
10MIN
5