Function Check; Vector Constant Setting (Ata) - JRC JMA-7710-6 Instruction Manual

5.9

Function Check

5.9.1 Vector Constant Setting (ATA)

Do not change the set point carelessly.
Attention
The vector constant is generally set to 7. If the constant is set to a larger value, target vectors can be
followed up easily when targets or the own ship change(s) their or its course or speed. On the
contrary, the vector accuracy is degraded.
1. Press the
Procedures
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. When changing the vector constant, use the data entry key to enter the
value to be changed and fix this setting using the
Exit
Exit 7. Press the
ATA TEST
ATA TEST
1. TEST VIDEO
2. VECTOR CONST
3. VIDEO TD LEVEL
4. VIDEO HIGH LEVEL
5. VIDEO LOW LEVEL
6. GATE SIZE
7. ATA NOISE LEVEL
8. ATA FTC LEVEL
SUB
key to open the SUB MENU.
MENU
5
key to open the ATA #1 menu.
9
key to open the ATA #2 menu.
3
key to open the ATA TEST menu.
2
key twice to select "VECTOR CONST".
SUB
key.
MENU
VDG VDH VDL
7
2 4
1 8
6
NORMAL SMALL
220
214
5 – 25
ENT
key.
0. PREV