Connecting A Gps Receiver And Nmea Equipment; Connecting Gps Receiver Of Jrc; Connecting Another Manufacturer's Gps Receiver Or Nmea Data Output Equipment - JRC JMA-5104 Instruction Manual

9.3.9 Connecting a GPS receiver and NMEA equipment

1. Connecting GPS receiver of JRC

A cable of a GPS receiver such as GPS100/DGPS212 can be connected by directly inserting the
cable to the J3 connector.
GPS100 manufactured by JRC

2. Connecting another manufacturer's GPS receiver or NMEA data output equipment

When connecting NMEA data from the NMEA data output equipment of JRC other than those
indicated above or other manufacturer's GPS, use 6-pin connector P3 for J3
(LTWD06BFFA-L180).
Connect signal output to pin 4 from the NEMA equipment and signal return from the NMEA
equipment to pin 3.
Connector for attached NMEA data connection
P3 (LTWD06BFFA-L180)
Insert a cable in J3 from GPS.
Connect signal input from the
NEMA equipment to 4 pins of P3
Connect signal input return from
the NEMA equipment to 3 pins
of P3
131