JRC JMA-7710-6 Instruction Manual page 82

3.3
To reset own ship position in the true motion display (TM) mode
Press the
The own ship is reset to the position where it was when the true motion mode was selected and will start
moving from the position.
Combinations of Presentation Mode and Motion Mode
• The presentation modes that can be used vary according to the motion mode.
RM
SRM
TM
CTM
Note
G In H-UP of RM, video processing cannot be used.
Differences Between RM and SRM
• The SRM mode was developed by improving the conventional RM mode to be able to perform
accurate video processing.
• When H-UP video processing is performed in the conventional RM mode, videos of other ships may
disappear. Since, in SRM mode, video processing is performed by true motion, accurate video
processing is performed and problems in the conventional mode do not occur.
Own ship display
Other ships display
Video processing
Radar trail
Off center
Plotter composite display
Differences Between TM and CTM
• The CTM modes displays images in TM mode by constantly fixing the own ship at the center.
• Both the CTM and TM modes allow composite display with a plotter.
Own ship display
Other ships display
Video processing
Radar trail
Off center
Plotter composite display
T M
key.
RST
H-UP N-UP
RM
Fixed at the center
Relative motion display
Relative motion
Relative motion display
Maximum 66%
Not possible
TM
True motion
True motion display
True motion
True motion display
Maximum 66%
Possible
3 – 23
C-UP SC-UP
SRM
Fixed at the center
Relative motion display
True motion
Relative motion display
Not possible
Not possible
CTM
Fixed at the center
Relative motion display
True motion
True motion display
Not possible
Possible