JRC JMA-7710-6 Instruction Manual page 79

Motion of Parallel Index Line
The parallel index line rotate in the same direction as the EBL control (q and w).
The parallel index line interval can be changed by rotating the VRM control (e and r).
The angle of the parallel index line is displayed in the
The interval of the parallel index line is displayed in the VRM2 box on the lower left of the screen.
➀
EBL
<Changing parallel index line interval>
The bearing and interval of the parallel index lines can be changed in the operation mode of EBL2 or
VRM2 respectively.
Display of parallel index line
➃
➁
➁
3 – 20
EBL2 box on the lower left of the screen.
➀
➂
➂
VRM
3.3
➃
3