Menu Composition; Menu Selection - JRC JMA-7710-6 Instruction Manual

2.2

Menu Composition

In addition to functions to be selected using keys on the front panel, this radar has some other functions
available on menus. To select these functions, press the numeric keys (
ENT
keys.
The menu are composed as follows:
[MAIN MENU]
MAIN
Pressing this key opens the main menu on the bottom of the screen and pressing again clears
MENU
it.
[SUB MENU]
SUB
Pressing this key opens the sub menu on the bottom of the screen and pressing again clears
MENU
it.

2.2.1 Menu Selection

(1) In order to select each item on the menu, press the numeric key corresponding to it.
(2) In order to change the contents in the item, press the same key used in (1) to select it and press the
ENT
key.
The underlined setting indicates the current one. The display is highlighted when selected. Pressing the
ENT
key confirms the setting.
(3) In order to change the numerical part in the item, press the same key used in (1), enter an appropriate
value using the numeric key and press the
is displayed in a box.
Note
CLR
Press the key to clear the input value.
When items are shown on more than one pages, "PREV" and "NEXT" will be displayed on the upper
right corner of the screen.
In this case, press the
menu. (Format is the same as above.)
Any item in the menu marked with "(STBY)" should be operated after setting the STBY mode by
TX
pressing the
STBY
ENT
. When numeral value input is enabled, the input part
9 key to display the next menu or the
key. (Format is the same as above.)
2 – 13
CLR
0 9
to ),
0
key to display the previous
and