9D-9 Exterior Parts:
Seat Height Adjustment
Adjust the seat height in the following procedures:
1) Remove the seat assembly. Refer to "Exterior Parts
Removal and Installation (Page 9D-6)".
2) Remove the seat height adjusting dampers.
3) Remove the front seat from the rear seat.
4) Adjust the seat height adjuster position "A" or "B".
"A": For low (Normal) position
B718H19406005
I718H1940020-01
I718H1940021-02
"B"
"A"
I718H1940022-01
"B": For high position
5) Reinstall the front seat and adjust the seat height
adjuster position "A" or "B".
"A"
"A": For low (Normal) position
6) Install the seat height adjusting dampers.
NOTE
Dampers are used in two ways "A" or "B".
Pay attention to the direction of dampers
when installing them.
CAUTION
!
Position of adjuster and direction of dampers
must be unified either "A" or "B".
"A": For low (Normal) position
"B": For high position
7) Reinstall the seat assembly. Refer to "Exterior Parts
Removal and Installation (Page 9D-6)".
"B"
I718H1940023-01
"B": For high position
"A"
I718H1940024-01
"B"
I718H1940025-01