Front Brake Master Cylinder Parts Inspection - Suzuki GSF1250 Service Manual

4A-17 Brake Control System and Diagnosis:
• Apply grease to the brake lever pivot bolt.
• Apply grease to the contact point between piston and
brake lever.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• Tighten the pivot bolt and lock-nut to the specified
torque.
Tightening torque
Brake lever pivot bolt: 6.0 N·m (0.6 kgf-m, 4.5 lb-
ft)
Brake lever pivot bolt lock-nut: 6.0 N·m (0.6 kgf-
m, 4.5 lb-ft)

Front Brake Master Cylinder Parts Inspection

Refer to "Front Brake Master Cylinder / Brake Lever
Disassembly and Assembly (Page 4A-15)".
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
I718H1410071-01
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
B718H14106014
I649G1410027-02
I649G1410028-02