Water Hose Inspection - Suzuki GSF1250 Service Manual

1F-6 Engine Cooling System:
4) Disconnect the cooling fan motor coupler (2), water
bypass hose (3) and radiator outlet hose (4).
3
5) Remove the radiator assembly (5) by removing the
bolts.
6) Remove the radiator heat shield (6).
6
"A"
"A"
"A": Hooked point
2
4
I718H1160034-01
5
I718H1160035-01
"A"
I718H1160073-02
7) Remove the spacers (7) and mounting bolt.
8) Remove the cooling fan motor from the radiator (8).
7
9) Remove the radiator covers (9), left and right.
9
Installation
Install the radiator in the reverse order of removal. Pay
attention to the following points:
• Connect the radiator hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Pour engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-12)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-12)".

Water Hose Inspection

Inspect the water hoses in the following procedures:
1) Remove the seat, right frame cover and fuel tank.
Refer to "Fuel Tank Removal and Installation in
Section 1G (Page 1G-9)".
2) Check the water hoses for crack, damage or engine
coolant leakage. If any defect is found, replace the
radiator hose with a new one.
8
I718H1160037-02
9
I718H1160038-02
B718H11606031