Specifications; Service Data; Tightening Torque Specifications - Suzuki GSF1250 Service Manual

Fork Spring
Measure the fork spring free length. If it is shorter than
the service limit, replace it with a new one.
Front fork spring free length
Service limit: 382 mm (15.0 in.)

Service Data

Front Fork
Unit: mm (in.)
Item
Front fork stroke
Front fork inner tube O.D.
Front fork spring free length
Front fork oil level (without spring,
outer tube fully compressed )
Front fork spring adjuster
Oil
Item
Front fork oil type
Front fork oil capacity (each leg)

Tightening Torque Specifications

Fastening part
Front fork cap bolt
Front fork lower clamp bolt
Front fork upper clamp bolt
Front fork damper rod bolt
Inner rod lock-nut
NOTE
The specified tightening torque is also described in the following.
"Front Fork Components (Page 2B-1)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque Specifications in Section
0C (Page 0C-7)".
I649G1220036-02

Specifications

390.4 (15.37)
GSF1250/A
GSF1250S/SA
3rd groove from top
Specification
Fork oil SS-08 or equivalent fork oil
GSF1250/A 472 ml (16.0/16.6 US/lmp oz)
GSF1250S/SA 471 ml (15.9/16.6 US/lmp oz)
N⋅m
23
23
23
20
20
Damper Rod
Move the inner rod by hand to inspect it if operating
smoothly.
Standard
130 (5.1)
43 (1.7)
143 (5.6)
144 (5.7)
Tightening torque
kgf-m lb-ft
2.3 16.5
2.3 16.5
2.3 16.5
2.0 14.5
2.0 14.5
Front Suspension: 2B-10
I649G1220037-02
B718H12207001
Limit
—
—
382 (15.0)
—
—
Note
—
B718H12207002
Note
(Page 2B-3)
(Page 2B-3)
(Page 2B-3)
(Page 2B-7)
(Page 2B-9)