Disassembly
1) Remove the washers (1), bearings (2) and spacer
(3) from the crank balancer.
1
2) Remove the balancer gear (4) along with the
dampers (5) from the crank balancer.
3) Remove the dampers (5) from the balancer gear (4).
5
4
Assembly
Assemble the crank balancer in the reverse order of
disassembly. Pay attention to the following point:
• Apply engine oil to the dampers.
3
1
2
I718H1140260-01
I718H1140261-01
I718H1140263-01
• Apply engine oil to the bearings, spacer and washers.
Crank Balancer Inspection
Refer to "Crank Balancer Disassembly and Assembly
(Page 1D-72)".
Damper
Inspect the damper for wear and damage, replace it if
any defects are found.
Bearing and Washer
Inspect the bearings and the washers for wear or
damage. Replace the bearing or the washer if there is
anything unusual.
Engine Mechanical:
1D-73
I718H1140262-01
B718H11406033
I718H1140264-01
I718H1140265-01