Printing The Distribution Number ("Set Numbering" Function); To Copy Using The "Set Numbering" Function - Konica Minolta bizhub 750 Copy Manual

8

Printing the Distribution Number ("Set Numbering" function)

!
Detail
The distribution number is normally printed as a four-digit number. If
"Start Number" is set to "1", "0001" is printed.

To copy using the "Set Numbering" function

0 Printing is not possible with "Set Numbering" function if the hard disk
drive is not installed.
1
In the Stamp/Overlay screen, touch [Set Numbering].
– For details on displaying the Stamp/Overlay screen, refer to "To
display the Stamp/Overlay screen" on page 8-79.
The Set Numbering screen appears.
2
Using the keypad, type in the starting number.
– The starting number can be set between 0 and 9999.
– The distribution number is normally printed as a four-digit number.
If "Start Number" is set to "1", "0001" is printed.
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Set Numbering" function, touch [OFF].
8-88
Application Functions
bizhub 750/600