To Specify The Binding Width ("Margin Setting" Function) - Konica Minolta Di1811p User Manual

7.6 Specifying Copy Settings

To specify the binding width ("MARGIN SETTING" function)

1
Select the "COPY SETTING 1" menu.
H
Refer to "To select the "COPY
SETTING 1" menu" on page 7-39.
2
Press the [6] key from the 10-Key Pad
to select "MARGIN SETTING".
3
Using the 10-Key Pad, enter the
binding width (margin), and then press
the [Yes] key.
H The binding width can be set
between 0 inch (0 mm) and 13/16
inch (20 mm).
H If you wish to correct the setting, press the [No] key, and then enter the new
number.
The "COPY SETTING 1" menu appears again.
Di1811p
7
7-45