3.6 Selecting a Paper/Size Setting
6
Touch [Y].
7
Using the keypad, type in the length of side Y.
The entered length of side Y appears.
8
Touch [Enter].
The paper size for the 1st drawer is set.
To store a non-standard (custom) paper size
Two non-standard paper sizes can be stored. Storing paper sizes that are used often
enables the paper size to be quickly selected, without having to re-enter the setting.
The following procedure describes how to store a size for non-standard paper
loaded into the 1st drawer.
1
Touch [Paper/Size].
A screen appears, showing the available Paper/Size settings.
2
Touch the key for the 1st drawer and then touch [Change Size].
❍
For the bypass tray, touch [Bypass].
The Size Input screen appears.
3
Touch [Custom Size].
The Custom Size
screen appears.
4
Make sure that [X] is
selected.
5
Using the keypad, type in the length of side X.
The entered length of side X appears.
6
Touch [Y].
7
Using the keypad, type in the length of side Y.
The entered length of side Y appears.
C350
3
3-23