Yamaha V star 1100 Owner's Manual page 154

ENGINE LOWER END
76
LEFT CRANKCASE
RIGHT CRANKCASE
5. Remove the mounting screw, and lift the shift
fork shaft stopper plate (Figure 75) from the right
crankcase half.
NOTE
Crankcase bolts are identified by a
number embossed on the crankcase
near each bolt hole. These numbers
also indicate the crankcase bolt tight
ening sequence. See Figure 76.
6. Before removing the crankcase bolts, draw an
outline of each case half on a piece of cardboard.
Punch holes along the drawing outline correspond-
ing to the bolt location in each crankcase half shown
in Figure 76. As each bolt is removed, insert it and
155
5