1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. star 2012
  6. Owner's manual

Yamaha star 2012 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual carefully before operating this vehicle.
OWNER'S MANUAL
XVS13CD(C)
LIT-11626-26-18
27D-28199-12

Advertisement

Table of Contents
loading

Related Manuals for Yamaha star 2012

Summary of Contents for Yamaha star 2012

  • Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL XVS13CD(C) LIT-11626-26-18 27D-28199-12...
  • Page 2 EAU10042 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • Page 3 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.
  • Page 4 IMPORTANT MANUAL INFORMATION EAU10133 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 5 IMPORTANT MANUAL INFORMATION EAU10193 XVS13CD(C) OWNER’S MANUAL ©2012 by Yamaha Motor Corporation, U.S.A. 1st edition, April 2012 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT Ignition circuit cut-off system ..4-16 Adjusting the clutch lever free LABELS ..........1-1 play ........... 7-19 FOR YOUR SAFETY – Checking the brake lever free SAFETY INFORMATION ....2-1 PRE-OPERATION CHECKS ..... 5-1 play ........... 7-20 Brake light switches .....
  • Page 7 Matte color caution ......8-1 Care ..........8-1 Storage ...........8-3 SPECIFICATIONS ......9-1 CONSUMER INFORMATION...10-1 Identification numbers ....10-1 Reporting safety defects ....10-3 Motorcycle noise regulation ..10-4 Maintenance record ......10-5 YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY ......10-7 YAMAHA EXTENDED SERVICE (Y.E.S.) ........10-9...

  • Page 8: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
  • Page 9 LOCATION OF IMPORTANT LABELS 2 California only VACUUM HOSE ROUTING PRESS. SENSOR INTAKE MANIFOLD 34B-21684-00 3 California only TIRE INFORMATION EMISSION HOSE ROUTING Cold tire normal pressure should be set THROTTLE BODY as follows. FUEL TANK • Up to 90 kg (198 lbs) load FRONT : 250 kPa, (2.50 kgf/cm²), 36 psi REAR...

  • Page 10: Safety Information

    SAFETY INFORMATION ● EAU1028A Never operate a motorcycle with- yourself conspicuous appears to out proper training or instruction. be very effective in reducing the Take a training course. Beginners chance of this type of accident. Be a Responsible Owner should receive training from a cer- Therefore: As the vehicle’s owner, you are respon- tified instructor.
  • Page 11 SAFETY INFORMATION ● Many accidents involve inexperi- • Always signal before turning or Protective Apparel enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from motorcy- erators who have been involved in other motorists can see you. cle accidents are the result of head in- ●...
  • Page 12 SAFETY INFORMATION ● Avoid Carbon Monoxide Poisoning Do not run engine outdoors where When loading within this weight limit, All engine exhaust contains carbon engine exhaust can be drawn into keep the following in mind: ● monoxide, a deadly gas. Breathing car- a building through openings such Cargo accessory...
  • Page 13 Yamaha accessories, which are avail- formed to your vehicle that change any lightweight as possible and able only from a Yamaha dealer, have of the vehicle’s design or operation should be kept to a minimum. been designed, tested, and approved characteristics can put you and others •...
  • Page 14 SAFETY INFORMATION ● tor and may limit control ability, Check that the fuel cock (if therefore, such accessories are equipped) is in the “OFF” position not recommended. and that there are no fuel leaks. ● ● Use caution when adding electri- Point the front wheel straight cal accessories.

  • Page 15: Description

    DESCRIPTION EAU10410 Left view 3,4,5 1. Spark plug (page 7-9) 9. Shift pedal (page 4-9) 2. Seat lock (page 4-13) 10.Engine oil filler cap (page 7-11) 3. Fuel injection system fuse (page 7-30) 4. Fuse box (page 7-30) 5. Main fuse (page 7-30) 6.

  • Page 16: Right View

    DESCRIPTION EAU10420 Right view 1. Rear brake fluid reservoir (page 7-21) 9. Engine oil filter cartridge (page 7-11) 2. Owner’s tool kit (page 7-2) 10.Brake pedal (page 4-9) 3. Battery (page 7-28) 11.Coolant reservoir (page 7-14) 4. Shock absorber assembly spring preload adjusting ring (page 4-14) 5.

  • Page 17: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 4-8) 2. Left handlebar switches (page 4-7) 3. Multi-function meter unit (page 4-4) 4. Main switch/steering lock (page 4-1) 5. Front brake fluid reservoir (page 7-21) 6. Right handlebar switches (page 4-7) 7.

  • Page 18: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10461 EAU10661 To lock the steering Main switch/steering lock All electrical systems are off. The key can be removed. EWA10061 WARNING Never turn the key to “OFF” or “LOCK” while the vehicle is moving. Otherwise the electrical systems will be switched off, which may result in loss of control or an accident.

  • Page 19: Indicator Lights And Warning Lights

    4. High beam indicator light “ ” or if the warning light remains on, have 5. Turn signal indicator light “ ” a Yamaha dealer check the electrical 6. Oil level warning light “ ” circuit. 7. Fuel level warning light “...
  • Page 20 3.0 seconds. If this oc- cles, the radiator fan(s) automati- light will flash ten times, then go off curs, have a Yamaha dealer check the cally switch on or off according to for 2.5 seconds. If this occurs, vehicle.

  • Page 21: Multi-Function Meter Unit

    INSTRUMENT AND CONTROL FUNCTIONS ● EAU50692 two tripmeters (which show the Speedometer Multi-function meter unit distance traveled since they were last set to zero) ● a fuel reserve tripmeter (which shows the distance traveled on the fuel reserve) ● a fuel meter ●...
  • Page 22 INSTRUMENT AND CONTROL FUNCTIONS Odometer, tripmeters, fuel reserve If the fuel level warning light comes on Fuel meter tripmeter, fuel meter and clock (see page 4-2), the display will auto- matically change to the fuel reserve tripmeter mode “Trip F” and start count- ing the distance traveled from that point.
  • Page 23 1. Turn the key to “OFF”. note the code number, and then have a the hours. 2. Push and hold the “SELECT” Yamaha dealer check the vehicle. 4. Push the “RESET” switch, and the switch. minute digits will start flashing.

  • Page 24: Handlebar Switches

    INSTRUMENT AND CONTROL FUNCTIONS 3. Turn the key to “ON”, and then re- EAU1234A Right Handlebar switches lease the “SELECT” switch after five seconds. Left 4. Adjust the multi-function meter unit panel brightness level by pushing the “SELECT” switch. 5. Push the “RESET” switch. The display will change to the prior mode.

  • Page 25: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS has traveled both about 150 m (490 ft) EAU12711 EAU12820 Start switch “ ” Clutch lever and for approximately 15 seconds. Push this switch to crank the engine However, the turn signal lights can also with the starter. See page 6-1 for start- be canceled manually by pushing the ing instructions prior to starting the en- switch in after it has returned to the cen-...

  • Page 26: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12871 EAU12891 EAU12941 Shift pedal Brake lever Brake pedal 1. Shift pedal 1. Brake lever 1. Brake pedal The shift pedal is located on the left The brake lever is located on the right The brake pedal is on the right side of side of the motorcycle and is used in side of the handlebar.

  • Page 27: Fuel Tank Cap

    INSTRUMENT AND CONTROL FUNCTIONS EAU13122 2. Turn the key counterclockwise to EAU13221 Fuel tank cap Fuel the original position, remove it, and Make sure there is sufficient gasoline in then close the lock cover. the tank. EWA10881 WARNING The fuel tank cap cannot be installed unless the key is in the lock.
  • Page 28 Gasoline is poisonous and can as well as to the exhaust system. cause injury or death. Handle gaso- Your Yamaha engine has been de- line with care. Never siphon gaso- signed to use unleaded gasoline with a line by mouth. If you should swallow...

  • Page 29: Fuel Tank Breather/Overflow Hose

    INSTRUMENT AND CONTROL FUNCTIONS EAU48760 EAU13433 ECA10701 Fuel tank breather/overflow Catalytic converter NOTICE hose This model is equipped with a catalytic Use only unleaded gasoline. The use converter in the exhaust system. of leaded gasoline will cause unre- EWA10862 pairable damage to the catalytic WARNING converter.

  • Page 30: Seat

    INSTRUMENT AND CONTROL FUNCTIONS EAU50680 2. Slide the seat rearward to fit the Seat slot in its bottom over the center seat holder. To remove the seat 3. Push the front of the seat down to 1. Insert the key into the seat lock, lock it in place.

  • Page 31: Helmet Holder

    It is recommended to have a Yamaha dealer adjust the spring preload. Should you choose to make the adjust- ment, use the special wrench included 1.

  • Page 32: Sidestand

    Take the shock Maximum (hard): in a possible loss of control. absorber assembly to a Yamaha Yamaha’s ignition circuit cut-off dealer for any service. system has been designed to assist the operator in fulfilling the respon- sibility of raising the sidestand be- fore starting off.

  • Page 33: Ignition Circuit Cut-Off System

    INSTRUMENT AND CONTROL FUNCTIONS this system regularly and have a EAU44892 Ignition circuit cut-off system Yamaha dealer repair it if it does not The ignition circuit cut-off system (com- function properly. prising the sidestand switch, clutch switch and neutral switch) has the fol- lowing functions.
  • Page 34 INSTRUMENT AND CONTROL FUNCTIONS WARNING With the engine turned off: 1. Move the sidestand down. If a malfunction is noted, have a Yamaha 2. Make sure that the engine stop switch is set to “ ”. dealer check the system before riding.

  • Page 35: For Your Safety - Pre-Operation Checks

    • If necessary, add recommended coolant to specified level. 7-14 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary.
  • Page 36 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-16, 7-24 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 7-24 •...
  • Page 37 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Check operation of ignition circuit cut-off system. Sidestand switch 4-15 • If system is not working correctly, have Yamaha dealer check vehicle.

  • Page 38: Operation And Important Riding Points

    ● a lean angle sensor to stop the en- ● understand, ask your Yamaha dealer. The transmission is in the neutral gine in case of a turnover. In this EWA10271 position.

  • Page 39: Shifting

    The neutral indicator the engine is running. Inade- light should come on. If not, ask a quate lubrication may damage Yamaha dealer to check the elec- the transmission. 1. Shift pedal trical circuit. 2. Neutral position ●...

  • Page 40: Engine Break-In

    OPERATION AND IMPORTANT RIDING POINTS 4. At the recommended shift points 3. Shift the transmission into the neu- EAU16841 Engine break-in shown in the following table, close tral position when the motorcycle There is never a more important period the throttle, and at the same time, is almost completely stopped.

  • Page 41: Parking

    If any engine trouble should occur WARNING during the engine break-in period, ● Since the engine and exhaust immediately have a Yamaha dealer system can become very hot, check the vehicle. park in a place where pedestri- ans or children are not likely to touch them and be burned.

  • Page 42: Periodic Maintenance And Adjustment

    – possibly leading to pending on the weather, terrain, geo- that is certified (if applicable). Yamaha death. See page 2-3 for more in- graphical location, and individual use, dealers are trained and equipped to...

  • Page 43: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 44: Periodic Maintenance Chart For The Emission Control System

    From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months. ● Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service. EAU17601 Periodic maintenance chart for the emission control system...
  • Page 45 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months Evaporative emis-...

  • Page 46: General Maintenance And Lubrication Chart

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU32187 General maintenance and lubrication chart INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months...
  • Page 47 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...
  • Page 48 24 months. Front and rear brake √ √ √ √ √ √ 25 * • Check operation. switches • Apply Yamaha chain and cable √ √ √ √ √ √ 26 * Control cables lube or engine oil thoroughly.
  • Page 49 PERIODIC MAINTENANCE AND ADJUSTMENT INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months •...

  • Page 50: Removing And Installing The Panel

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU18751 EAU42431 Removing and installing the Checking the spark plugs panel The spark plugs are important engine components, which are easy to check. The panel shown needs to be removed Since heat and deposits will cause any to perform some of the maintenance spark plug to slowly erode, the spark jobs described in this chapter.
  • Page 51 0.8–0.9 mm (0.031–0.035 in) diagnose such problems yourself. In- ed in the additional tool kit, which stead, have a Yamaha dealer check was handed out separately at the To install a spark plug the vehicle.

  • Page 52: Canister (For California Only)

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU19681 EAU42599 Canister (for California only) Engine oil and oil filter car- If a torque wrench is not available when tridge installing a spark plug, a good estimate The engine oil level should be checked THROTTLE BODY FUEL TANK of the correct torque is 1/4–1/2 turn before each ride.
  • Page 53 4. Minimum level mark An oil filter wrench is available at a 1. Engine oil drain bolt 4. If the engine oil is below the mini- Yamaha dealer. 2. Gasket mum level mark, add sufficient oil of the recommended type to raise 6.
  • Page 54 PERIODIC MAINTENANCE AND ADJUSTMENT Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replace- ment: 3.20 L (3.38 US qt, 2.82 Imp.qt) With oil filter cartridge replacement: 3.40 L (3.59 US qt, 2.99 Imp.qt) 1. O-ring 1. Torque wrench Be sure to wipe off spilled oil on any parts after the engine and exhaust sys- Tightening torque:...

  • Page 55: Coolant

    A. (See page 7-9.) off and have a Yamaha dealer check varies with engine temperature. 4. Remove the coolant reservoir cap, the vehicle.

  • Page 56: Replacing The Air Filter Element

    Replace the air filter element added to the coolant, have a more frequently if you are riding in un- Yamaha dealer check the anti- usually wet or dusty areas. freeze content of the coolant as 1. Remove the air filter case cover by soon as possible, otherwise the removing the bolts.

  • Page 57: Checking The Throttle Grip Free Play

    The valve clearance changes with use, resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 1. Air filter element 3.

  • Page 58: Tires

    EWA10511 vere injury or death from loss of tact a Yamaha dealer immediately and WARNING have the tire replaced. control. Never overload your vehicle. Opera- ●...

  • Page 59: Cast Wheels

    After extensive tests, only the tires list- er damage before each ride. If any should also be left to a Yamaha ed below have been approved for this damage is found, have a Yamaha dealer.

  • Page 60: Adjusting The Clutch Lever Free Play

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU50700 6. Tighten the locknut at the clutch Adjusting the clutch lever free cable, and then slide the rubber If the specified clutch lever free play play covers to their original positions. could be obtained as described above, 7.

  • Page 61: Checking The Brake Lever Free Play

    If there is free play, come on just before braking takes ef- have a Yamaha dealer inspect the fect. If necessary, adjust the rear brake brake system. light switch as follows, but the front...

  • Page 62: Checking The Front And Rear Brake Pads

    EAU22581 Checking the front and rear Checking the brake fluid level peared, have a Yamaha dealer replace brake pads Before riding, check that the brake fluid the brake pads as a set. is above the minimum level mark.
  • Page 63 ● Rear brake Use only the specified brake flu- fluid level goes down suddenly, have a id; otherwise, the rubber seals Yamaha dealer check the cause before may deteriorate, causing leak- further riding. age. ● Refill with the same type of brake fluid.

  • Page 64: Changing The Brake Fluid

    Changing the brake fluid Drive belt slack with a force of 45 N (4.5 kgf, 10 lbf) Have a Yamaha dealer change the The drive belt slack should be checked applied to the belt with a belt ten- brake fluid at the intervals specified in and adjusted at the intervals specified sion gauge as shown.

  • Page 65: Checking And Lubricating The Cables

    5. If the drive belt slack is incorrect, EAU23095 EAU49920 Checking and lubricating the Checking and lubricating the have a Yamaha dealer adjust it. cables throttle grip and cable The operation of all control cables and The operation of the throttle grip should the condition of the cables should be be checked before each ride.

  • Page 66: Checking And Lubricating The Brake And Shift Pedals

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU44273 EAU23143 Recommended lubricant: Checking and lubricating the Checking and lubricating the Lithium-soap-based grease brake and shift pedals brake and clutch levers The operation of the brake and shift The operation of the brake and clutch pedals should be checked before each levers should be checked before each ride, and the pedal pivots should be lu-...

  • Page 67: Checking And Lubricating The Sidestand

    The operation of the sidestand should The pivoting points of the rear suspen- be checked before each ride, and the sion must be lubricated by a Yamaha sidestand pivot and metal-to-metal dealer at the intervals specified in the contact surfaces should be lubricated if periodic maintenance and lubrication necessary.

  • Page 68: Lubricating The Swingarm Pivots

    The swingarm pivots must be lubricat- face and hold it in an upright posi- fork does not operate smoothly, ed by a Yamaha dealer at the intervals tion. WARNING! To avoid injury, have a Yamaha dealer check or re- specified in the periodic maintenance securely support the vehicle so pair it.

  • Page 69: Checking The Steering

    If any free (Valve Regulated Lead Acid) battery. the wheel bearings. play can be felt, have a Yamaha There is no need to check the electro- dealer check or repair the steering. lyte or to add distilled water. However, the battery lead connections need to be checked and, if necessary, tightened.
  • Page 70 To charge the battery 2. If the battery will be stored for more ways shield your eyes when Have a Yamaha dealer charge the bat- than two months, check it at least working near batteries. In case tery as soon as possible if it seems to...

  • Page 71: Replacing The Fuses

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU50810 Replacing the fuses The main fuse, the fuel injection system fuse, and the fuse box, which contains the fuses for the individual circuits, are located under the seat. (See page 4-13.) 1. Signaling system fuse 1.

  • Page 72: Replacing The Headlight Bulb

    4. If the fuse immediately blows cohol or thinner. again, have a Yamaha dealer ● Headlight lens check the electrical system. Do not affix any type of tinted film or stickers to the headlight 1.

  • Page 73: Tail/Brake Light

    3. Unhook the headlight bulb holder, and then remove the burnt-out bulb. 1. “TOP” mark 6. Install the headlight unit by install- ing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Headlight bulb holder 2. Headlight bulb 7-32...

  • Page 74: Replacing A Turn Signal Light Bulb

    Replacing a turn signal light License plate light bulb If the license plate light does not come on, have a Yamaha dealer check the 1. Remove the turn signal light lens electrical circuit or replace the bulb. by removing the screws.

  • Page 75: Supporting The Motorcycle

    However, should your motorcycle To service the front wheel require any repair, take it to a Yamaha 1. Stabilize the rear of the motorcycle dealer, whose skilled technicians have by using a motorcycle stand or, if...
  • Page 76 PERIODIC MAINTENANCE AND ADJUSTMENT heaters or furnaces. Gasoline or gasoline vapors can ignite or ex- plode, causing severe injury or property damage. 7-35...

  • Page 77: Troubleshooting Charts

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 78 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 79: Motorcycle Care And Storage

    Be ble. Rust and corrosion can develop Cleaning sure to consult a Yamaha dealer for even if high-quality components are ECA10772 used. A rusty exhaust pipe may go un-...
  • Page 80 MOTORCYCLE CARE AND STORAGE off any detergent residue using Test the product on a small hid- plenty of water, as it is harmful den part of the windshield to Salt sprayed on roads in the winter may to plastic parts. make sure that it does not leave remain well into spring.

  • Page 81: Storage

    Contaminants on the brakes or tires of the presence of ammonia) can cause loss of control. ● Consult a Yamaha dealer for ad- and areas where strong chemi- ● Make sure that there is no oil or vice on what products to use.
  • Page 82 MOTORCYCLE CARE AND STORAGE 2. Fill up the fuel tank and add fuel e. Remove the spark plug caps stabilizer (if available) to prevent from the spark plugs, and then Make any necessary repairs before the fuel tank from rusting and the install the spark plugs and the storing the motorcycle.

  • Page 83: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Fuel: Overall length: Recommended brand: Recommended fuel: 2530 mm (99.6 in) YAMALUBE Unleaded gasoline (Gasohol (E10) Overall width: Type: acceptable) 860 mm (33.9 in) SAE 10W-30, 10W-40, 10W-50, 15W-40, Fuel tank capacity: Overall height: 20W-40 or 20W-50 15.0 L (3.96 US gal, 3.30 Imp.gal) 1130 mm (44.5 in) Fuel reserve amount:...
  • Page 84 SPECIFICATIONS Gear ratio: Loading: Specified brake fluid: 1st: DOT 4 Maximum load: Rear brake: 2.769 (36/13) 204 kg (450 lb) 2nd: (Total weight of rider, passenger, cargo and Type: 1.778 (32/18) accessories) Single disc brake 3rd: Tire air pressure (measured on cold Operation: 1.381 (29/21) Right foot operation...
  • Page 85 SPECIFICATIONS Headlight: Headlight fuse: 20.0 A Bulb type: Taillight fuse: Halogen bulb Bulb voltage, wattage × quantity: 10.0 A Signaling system fuse: Headlight: 10.0 A 12 V, 60.0 W/55.0 W × 1 Ignition fuse: Tail/brake light: 15.0 A Radiator fan fuse: Front turn signal/position light: 12 V, 23.0 W/8.0 W ×...

  • Page 86: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.
  • Page 87 This information illustration. This label shows specifica- will be needed when ordering spare tions related to exhaust emissions as parts from a Yamaha dealer. required by federal law, state law and Environment Canada. 10-2...

  • Page 88: Reporting Safety Defects

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 89: Motorcycle Noise Regulation

    CONSUMER INFORMATION EAU26560 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new ve- hicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 90: Maintenance Record

    CONSUMER INFORMATION EAU26632 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required.
  • Page 91 CONSUMER INFORMATION Maintenance Date of Servicing dealer Mileage Remarks interval service name and address 36000 mi (55000 km) or 54 months 40000 mi (61000 km) or 60 months 10-6...

  • Page 92: Yamaha Motor

    CONSUMER INFORMATION EAU26663 YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY Yamaha Motor Corporation, U.S.A. hereby warrants that CUSTOMER’S RESPONSIBILITY under this Engine new Yamaha motorcycles will be free from defects in warranty shall be to: Displacement Period...
  • Page 93 CUSTOMER SERVICE What costs are my responsibility during the warranty period? If your machine requires warranty service, you must take it to any authorized Yamaha The customer’s responsibility includes all costs of normal maintenance services, motorcycle dealer within the continental United States. Be sure to bring your warranty non-warranty repairs, accident and collision damages, and oil, oil filters, air filters, registration card or other valid proof of the original date of purchase.

  • Page 94: Yamaha Extended Service (Y.e.s.)

    This excellent Y.E.S. plan coverage is only available to dealer to see how comforting uninterrupted factory- Yamaha owners like you, and only while your Yamaha is still backed protection can be. within the Yamaha Limited Warranty period. So visit your authorized Yamaha dealer to get all the facts.
  • Page 95 Yamaha Limited Warranty expires. A special note: If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your frame number). We’ll be happy to help you get the Y.E.S. coverage you need.
  • Page 96 INDEX Fuel............4-10 Fuel level warning light ......4-3 Air filter element, replacing ....7-15 Panel, removing and installing ....7-9 Fuel tank breather/overflow hose ..4-12 Parking ............6-4 Fuel tank cap ........4-10 Part locations .......... 3-1 Battery........... 7-28 Fuses, replacing ........7-30 Brake and clutch levers, checking and lubricating ...........
  • Page 97 INDEX Turn signal indicator light......4-2 Turn signal light bulb, replacing.... 7-33 Turn signal switch........4-7 Valve clearance ........7-16 Vehicle Emission Control Information label............ 10-2 Vehicle identification number....10-1 Warranty, extended ......10-9 Warranty, limited........10-7 Wheel bearings, checking ....7-28 Wheels..........
  • Page 99 Yamalube – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products. They’re formulated and approved by the toughest judges we know: the Yamaha engineering teams that know your Yamaha from the inside out.
  • Page 100 PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2012.05-1.0×1 CR...

This manual is also suitable for:

Xvs13cd 2012Xvs13cdc 2012

Table of Contents