Connectors; Paper Ejection Tray - Epson TM-C3400BK Technical Reference Manual

INK (ink) LED: Red
• Flashes when the ink is low or waste ink in the ink cartridge is nearly full.
• Lights when it is time to replace the ink cartridge, when the ink cartridge is not installed or is not
correctly installed, and when waste ink in the ink cartridge is full.
• Lights off when ink in the ink cartridge is adequate.
PAPER (paper out) LED: Red
• Lights when the paper is not installed or is not correctly installed.
• Lights off when the paper is correctly installed.
 The INK LED does not flash even if the ink is low when the "LED Notification Setting at
 The printer status is also displayed with combination of lighting and flashing of LED's.

Connectors

All cables are connected to the connector on the lower rear of the printer.
• Power connector:
• USB Connector:
• Ethernet Connector:
• Inlet (AC Adapter):
For details how to connect the interface and power supply connector, see
Printer to the Host Computer" on page 65
180)" on page

Paper ejection tray

Installing the paper ejection tray enables you to accumulate printed paper temporarily in it.
 For how to attach the paper ejection tray, see
 For maximum capacity for ejected paper of the paper ejection tray, see
Paper may fall from the paper ejection tray due to a curl or the length of the paper.
18
Ink Low" is set not to appear on [Notification Settings] on [Maintenance And Utilities] tab
of the printer driver.
See "Status/Error Indications" on page 19
Connects cable of the AC adapter. Connected when shipped from the
factory.
Connects the printer with the host computer.
Connects the printer with the network.
Connects the AC cable.
62.
Tray" on page 95.
Tray" on page 51.
for details.
and "Connecting the Power Supply Unit (PS-
"Attaching/Adjusting the Paper Ejection
"Connecting the
"Paper Ejection