Performing The Initial Adjustment (Correcting For Misalignment In Bidirectional Printing More Precisely) - Roland VersaUV LEJ-640 User Manual

Performing the Initial Adjustment (Correcting for Misalignment in Bidirectional Printing More Precisely)

Perform the initial adjustment (correction for misalignment in bidirectional printing more precisely) of this
machine. This adjustment is necessary in the following cases. When changing the print-head height, change
the height before performing this adjustment.
 P. 122, "Adjusting the Print-Head Height to Match Media Thickness"
 When using this machine for the first time
 When changing the media to use
 When further correction is required to improve printing, such as when simple correction is
performed for misalignment in bidirectional printing. P. 119, "Correcting for Misalignment
in Bidirectional Printing"
1.
Output a test pattern.

Press .
v
MENU
ADJUST BI-DIR
w
ADJUST BI-DIR
DETAIL SETTING
x
DETAIL SETING
TEST PRINT

Remove the front cover 2.

Press and feed the media forward to a position where you can clearly see the
condition of the test print.
This operation is not necessary when using roll media or sheet media. Proceed to step
{
DETAIL SETING
TEST PRINT
|
DETAIL SETTING
SETTING NO.1
Press several times until the screen shown on
the left appears.
Press and then
Press .
Press .
A test pattern is output.
When printing ends, press
 w
Repeat steps to
left appears.
Press .
Press .
Loading Media
.
and then
{
.
until the screen shown on the
2
.
59