Cleaning - Roland VersaUV LEJ-640 User Manual

Cleaning

WARNING
Wipe away any buildup of ink or grime on the media path and other locations as daily cleaning. In particular,
the pinch rollers, grit rollers, platen, and the rubber cover on the front cover 2 are likely to get a build-up of
grime. Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
 This machine is a precision device, and is sensitive to dust and dirt. Perform cleaning on a daily basis.
 Never attempt to oil or lubricate the machine.
Pinch rollers
 Periodically wipe away any grime. Failure to clean properly may result in the transfer
of grime to the surface of media. Additionally, if they are dirty when performing output
involving pullback movement, an imprint from the pinch rollers may be left behind.
 The pinch rollers can be removed. You can remove them for cleaning.
*Make sure you reattach the pinch rollers before printing.
Remove the pinch rollers by
gently pushing them down.
Wipe away any buildup of ink
or grime on the media path.
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
Reattach the pinch rollers by
gently pushing them back up.
Grit rollers
Remove buildup of media and other material using a
brush. Never use a metal brush.
Maintenance that Should Be Performed Daily
Roller of the separating knife
Paper dust is likely to deposit on
this roller. Wipe the roller regularly.
4
93