Loading A Saved Preset; Assigning A Name To A Preset - Roland VersaUV LEJ-640 User Manual

Loading a Saved Preset

Procedure

Press .

MENU
PRESET

LOAD
NAME1
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned,
you select from among NAME1 through NAME8.) If you load a preset while
goes dark. When starting output, press

Assigning a Name to a Preset

Procedure

Press .

MENU
PRESET

PRESET
NAME

NAME
NAME1

NAME
S_

NAME
SAMPLE_
Press to display the left figure.
Press twice.
Press to select a name to be called.
Press to enable the setting.
The settings are changed and the screen shown in the figure appears.
again to make the output operation available.
Press to display the left figure.
Press and then
Press .
Press to select one of NAME1 through 8.
Press .
Press to enter a character.
When a character is decided, press
The characters you can enter are "A" through "Z," "0" through "9," and
the "-" character. You can enter up to 15 characters, including spaces.
Press to enter a character.
Enter the following characters in the same way.
When entries are completed, press
setting.
Fully Utilizing Preset Function
is illuminated,
.
.
to enable the
5
117