Loading Sheet Media
Use the following procedure to load standard-sized sheet media.
*Before loading sheet media, remove the media hold down unit and the rigid media tables.
Procedure
Open the front cover 1.
v
Attach the front cover 2.
If the front cover 2 is already attached, proceed to step
Tighten the retaining screws.
Make sure you secure the front cover 2 with the retaining screws.
The machine will not operate if the front cover 2 is not attached.
Dangerous UV light will escape from the machine if the front cover 2 is not attached.
w
Pass the sheet media through the machine.
Front cover 2
Make sure you attach the front cover 2.
.
Loading Media
2
47