Replacing Consumable Parts
Replacing the Wiper
TIME FOR
WIPER REPLACE
When a warning beep sounds during replacing the wiper.
A warning beep sounds after 10 minutes. At this time, stop work, attach the side cover. And then press
to finish the wiper replacement menu. When the print-head protection operation finishes, restart
the procedure from the beginning.
CAUTION
4
1.
Display the [REPLACE WIPER] menu.
TIME FOR
WIPER REPLACE
Remove any media from the platen.
Press
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE WIPER
108
The wipers are components that you use when cleaning the print heads.
When the screen displays a message like the one shown, it means the
item needs to be replaced. Replace with new items.
Regarding the purchase of the wiper, contact your authorized Roland
DG Corp. dealer.
Be sure to perform operations as specified by these instructions, and
never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
When the message shown in the figure appears, press
.
Press
the left appears.
Press
Press
Press
The print-head carriage moves to a location where wiper replacement
is possible, and then the screen shown in the figure appears.
.
several times until the screen shown on
and then
and then
.
.
.