Accommodating To The Types And Condition Of Media; Adjusting The Print-Head Height To Match Media Thickness - Roland VersaUV LEJ-640 User Manual

Accommodating to the Types and Condition of Media

Adjusting the Print-Head Height to Match Media Thickness

Procedure

Press

MENU
HEAD HEIGHT

HEAD HEIGHT
MIDDLE
Description
When using media that is likely to rise up, note that the media may contact the print heads. When you are
using such media, adjust the print-head height to "HIGH."
When the print-head height is set to "HIGH", printing may be coarse and print quality may be affected. If this
happens, refer to the pages indicated below.
5
 P. 119, "Correcting for Misalignment in Bidirectional Printing"
 P. 120, "Correcting for Misalignment in Bidirectional Printing More Precisely"
 P. 129, "Preventing Soiling of the Media and Dot Drop-out"
Select "LOW" when you want to print small text at high resolution. However, note that because you cannot
use the media clamps, the media may rise up and contact the print heads.
Default Setting
[HEAD HEIGHT]: MIDDLE
122
.
Press
Press
Press
HIGH
HIGH: Use this setting when using media that may rise up.
MIDDLE: Use this setting normally (recommended).
LOW: Use this setting when you want to print small text at high
resolution.
* When "HIGH" or "LOW" is selected, print quality may be affected.
See "Description" for more information.
Press
several times to display the left figure.
.
to select an item.
to enable the setting.