Preventing Soiling Of The Media And Dot Drop-Out - Roland VersaUV LEJ-640 User Manual

Preventing Soiling of the Media and Dot Drop-out

Procedure

Press .

MENU
SUB MENU

SUB MENU
PERIODIC CL.

PERIODIC CL .
NONE 10 min

W XXXmm
SETUP SHEET
ROLL
Description
In the following cases, Ink tends to collect on the surface of the print heads. Under some conditions, this ink
may be transferred to the media or cause dot drop-out.
 When you use media prone to buildup of static charge.
 When the ambient temperature is low.
 When the print-head height is set to "HIGH."
Selecting "PAGE" or a value from "5 min" to "990 min," the ink buildup is removed before or during printing
while printing is performed. Note, however, that using "PAGE" or a value from "5 min" to "990 min," results in
longer printing times.
Default Setting
[PERIODIC CL.]: NONE
Accommodating to the Types and Condition of Media
Press several times to display the left figure.
Press .
Press several times to display the left figure.
Press .
Press
PAGE
Automatic cleaning is performed every time before printing starts.
5 to 990 min
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here.
NONE
Automatic cleaning is not performed.
Press to enable the setting.
Press
original screen.
to select an item.
in this order to go back to the
5
129