|
}
Press
.
starts to flash. When initialization ends,
width is displayed.
Continue to "Performing the Initial Adjustment (Correcting for Misalignment in Bidirectional
Printing More Precisely)" on page 59.
Loading Rigid Media
Use the following procedure to load rigid media.
1.
Attach the rigid media tables.
Open the front cover 1.
If the front cover 2 is attached, remove it.
v
Attach the media hold down unit.
Refer to the Setup Guide for more information.
For assembly instructions, refer to "MB-640 ASSEMBLY INSTRUCTIONS."
Press Key
remains steadily lighted, and the printable
Loading Media
to select "ROLL."
2
49