Using Transparent or High Gloss Media
Transparent media can be treated as opaque media by affixing an opaque sheet to the
reverse side of the media.
When using transparent rigid media such as acrylic media, an opaque sheet, such as a protective
sheet, may be affixed to the reverse side of the rigid media. The opaque sheet is not peeled off and
the media will be treated as opaque media, therefore the settings described here are not necessary.
1.
Set the media type to "CLEAR."
Press
.
MENU
SUB MENU
SHEET TYPE
OPAQUE
CLEAR
2.
Set the media width.
Press
.
MENU
SUB MENU
SUB MENU
SHEET WIDTH
SHEET WIDTH
1625mm
1625mm
SUB MENU
SHEET WIDTH
Accommodating to the Types and Condition of Media
Press
several times to display the left figure.
Press
twice.
Press
to select "CLEAR."
Press
to enable the setting.
The settings are changed and the screen shown in the figure appears.
Press
several times until the screen shown on
the left appears.
Press
.
Press
several times until the screen shown on
the left appears.
Press
.
Press
Setting range
Roll media: 210 to 1625 mm (8.3 to 64 inches)
Rigid media, Sheet media: 250 to 1625 mm (9.8 to 64 inches)
Press
to enable the setting.
Press
to return to the previous screen.
and select a value.
5
123