Using Transparent Media - Roland VersaArt RE-640 User Manual

Using Transparent Media

1.
Set the media type to "CLEAR."

Press .

MENU
SUB MENU

SHEET TYPE
OPAQUE CLEAR

SETUP SHEET
2.
Make the setting for the media width.

Press .

MENU
SUB MENU

SUB MENU
SHEET WIDTH

SHEET WIDTH
1371mm 1200mm

SUB MENU
SHEET WIDTH
3.
Load transparent media to the printer.
Refer to p. 33, "Loading Media" and load media on the machine.
4.
Make the setting for the location of the right edge of the media.

SHEET POS.
SAVE

Open the front cover.
Accommodating to the Types and Condition of Media
Press several times to display the left figure.
Press twice.
Press
Press to enable the setting.
The settings are changed and the screen shown in the figure ap-
pears.
Press several times to display the left figure.
Press .
Press .
Press .
Use to enter the media width.
Press to enable the setting.
Press to go back to the previous screen.
Press .
Press .
The print heads move to the position now set.
to select "CLEAR."
4
95