Table of Contents
Advertisement
About the Media Used
Types of Media
This Master Guide uses the word "media" to mean sheets used for output. Media used with this ma-
chine are broadly classified into two types:
• Roll media: Media wound onto a paper tube
• Sheet media: Any media that is not wound on to a paper tube, e.g. standard size paper sheets
For both roll and sheet media, different types of paper can be selected according to the purpose. For
details contact your media supplier. Media can also be purchased from the Roland DG Corp. website.
RELATED LINKS
・ http://www.rolanddg.com/
Usable Media
Some media are not suitable for use with this machine. When selecting media, always conduct a test
and confirm the output quality meets your requirements.
Size
*1
Width
Cuttable media thickness
Maximum media thickness including any
backing paper or release paper
Roll outer diameter
Paper tube (core) inner diameter
*1
For both roll media and sheet media
Maximum roll weight
6 kg
Other conditions
The following media cannot be used.
• Roll media with inner start section glued to the paper tube (core)
• Heavily warped or curled media
• Media that cannot withstand the heat generated by the media heating system
• Media with a bent or crushed paper tube (core)
• Media that bends under its own weight when loaded
• Media with a bent roll
• Media that is rolled unevenly
• 150 to 170 mm (5.9 to 6.7 inch)
• 200 to 235 mm (7.9 to 9.3 inch)
• 287 to 322 mm (11.3 to 12.7 inch)
• 348 to 383 mm (13.7 to 15.1 inch)
• 393 to 429 mm (15.5 to 16.9 inch)
• 439 to 474 mm (17.3 to 18.7 inch)
• 487 to 515 mm (19.2 to 20.3 inch)
*1
0.22 mm (depending on the media composition)
For printing only: 1.0 mm
*1
For cutting: 0.4 mm
150 mm
76.2 mm (3 in.) or 50.8 mm (2 in.)
Usable Media
Basic Information
15
Advertisement
Table of Contents
