Menu Descriptions - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

1.5.2 Menu Descriptions

Note "*1": Displayed only when optional hard disk unit is installed.
Menu Menu Item / Setting Value (Shaded one is the default)
Print Queue *1
Hold Queue *1
Print Queues menu
Saved Job Queue
Print Job Log Sheet
PRODUCT DESCRIPTION
XXXXXXXXXXX
(name of queued print job)
XXXXXXXXXXX
View Hold Queue (name of held print
job)
Resume All Jobs
XXXXXXXXXXX (name of stored print
*1
job)
Table 1-8. Menu List
Lists the estimated start time and time needed to print the selected job.
It also predicts whether the job can be completed without replacing paper, ink or the
Waiting Job Name
Maintenance Box. Printing can proceed even if "Can Not Complete" is displayed.
User
However, the printer may run out of ink or paper during printing.
Estimated Start
Remote Manager and the LFP HDD Utility display the reason for the "Can Not
Time
Complete" message and allow you to hold or cancel the job.
Estimated Print
The printer will only predict availability on the basis of the amount of paper
Time
remaining if "On" is selected for "Roll Paper Remaining".
Printing
The printer will not predict availability on the basis of the amount of ink remaining
Availability
when documents are printed using LFP Print Plug-In for Office or EPSON
CopyFactory5.
This option is available only if "On" is selected for "Store Held Job" in the Setup
Paused Job Name
menu.
User
Displays the print settings for held jobs and the reason the job is held.
Paper Type
Jobs that are held because the job print settings differ from those currently selected
for the printer can be printed as described below.
Source
1. Replace the paper and take whatever other steps may be necessary to ready the
Size
device for printing.
Reason For Hold
2. Select "Resume All Jobs".
Press the [OK] button to resume all held jobs currently in the queue.
Stored Job Name
User
Length
Pages
Shows the status of the selected stored job when it was last printed.
Paper Type
After viewing the job, press the [OK] button to enter the number of copies. Press the
[ ]/[ ] buttons to choose the number of copies and press the [OK] button to display
Copies
the estimated print time and print availability. Press the [OK] button to start printing.
Source
Size
Estimated Print
Time
Press the [OK] button to print the print job log.
Control Panel Specifications
Explanation
Revision B
27
Confidential