Epson SC-T7000 series Service Manual page 125

SC-T7000 series/SC-T5000 series/SC-T3000 series
When the INK TUBE is removed at the following step, ink may
C A U T I O N
drip off from the tube. Prepare a waste cloth or the like in advance
and be careful not to contaminate the surroundings.
16. Remove the two screws, and remove the INK TUBE from the DAMPER KIT.
D) Silver M2.5x16 screw: 2 pcs
Figure 3-57. Removing the INK TUBE
DISASSEMBLY & ASSEMBLY
CR FFC
INK TUBE
DAMPER KIT
D
D
Disassembly and Assembly Procedure
17. Remove the three screws, and remove the DAMPER KIT.
E) Silver M3x10 Machine screw: 3 pcs
Before installing the joint, make sure the Joint Rubbers are
attached to it.
Before attaching the Joint Rubber, let it get wet with cleaning
liquid.
Upper side
E
Figure 3-58. Removing the DAMPER KIT
Revision B
Joint Rubber
E
E
DAMPER KIT
125
Confidential