Epson SC-T7000 series Service Manual page 32

SC-T7000 series/SC-T5000 series/SC-T3000 series
Menu Menu Item / Setting Value (Shaded one is the default)
Printer Setup
Setup menu
Printer Status
PRODUCT DESCRIPTION
Drying Time Per
Page
Paper Size Check
Advanced Settings
Paper Skew Check
Store Held Job
Restore Settings
Firmware Version
Option Status
Show Total Prints
Print Status Sheet
Control Panel Specifications
Table 1-8. Menu List
Specify how long the printer pauses to allow the ink to dry after printing each page;
choose from values between 0 and 60 minutes. Depending on the ink density or paper
type, the ink may take a while to dry. If the ink blurs on the paper, set a longer time
0 to 60 minutes
for drying the ink.
The longer the drying time, the more time required for printing.
On Choose whether the printer automatically detects ("On") or does not detect ("Off")
the paper width. Try choosing "Off" if a paper setting error is displayed when the
paper is correctly loaded. Note, however, that the printer may print outside the paper
when "Off" is selected. If it prints beyond the edges of the paper, the inside of the
Off
printer becomes dirty with ink. We generally recommend to operate with this setting
set to "On".
On If "On" is selected, an error will be displayed in the control panel and printing will
stop if the paper is skewed; select "Off" to disable this feature. "On" is recommended
Off
in most circumstances as skewed paper may cause the printer to jam.
On This item is available when an optional hard disk unit is installed. If "On" is selected,
print jobs that require a paper type, source, or output paper size (width) that differs
from those currently selected with the printer will be saved as held jobs; select "Off"
to disable this feature.
If "Off" is selected, an error will be displayed and will printing will stop if the source
selected for the print job does not match that selected with the printer.
Off
If "On" is selected, printing will not stop if an error occurs; instead, jobs with non-
matching settings will be saved to the hard disk unit as held jobs. Held jobs can be
printed from the Print Queues menu after the printer has been readied by, for
example, loading the correct type of paper.
Yes
Select "Yes" to restore all printer settings to default values.
No
xxxxxxx,x.xx,xxxx You can see the firmware version.
Lists the optional accessories currently connected to the printer and available for use.
2
XXXXXXX m
View the total area printed (six-figure maximum).
(XXXXXX ft 2 )
Press the [OK] button to print a list of current printer settings.
Choose this option to view settings at a glance.
Explanation
Revision B
32
Confidential