Epson SC-T7000 series Service Manual page 162

SC-T7000 series/SC-T5000 series/SC-T3000 series
20. Disconnect the FFC from the PW SENSOR, and remove the PW SENSOR.
Make sure that you can see the light emitter/receiver of the PW
SENSOR through the hole on the Sensor Cover.
PW SENSOR
(Light emitter/receiver)
DISASSEMBLY & ASSEMBLY
Sensor Cover
Hole
Disassembly and Assembly Procedure
PW SENSOR
FFC
Connector
Figure 3-114. Removing the PW SENSOR
Revision B
162
Confidential