Epson SC-T7000 series Service Manual page 193

SC-T7000 series/SC-T5000 series/SC-T3000 series
5. Remove the two screws that secure the TAKE-UP REEL MAIN BOARD Unit.
B) Black, Phillips, Bind S-tite M3x6:
6. Disconnect the connector from the TAKE-UP REEL MOTOR, and remove the TAKE-
UP REEL MAIN BOARD Unit.
7. Remove the C-Ring.
8. Remove the four screws that secure the Motor Mounting Plate, and remove the Motor
Mounting Plate.
C) Black, Phillips, Bind S-tite M4x8:
9. Remove the two gears from the Motor Mounting Plate.
10. Remove the two screws that secure the TAKE-UP REEL MOTOR, and remove the
TAKE-UP REEL MOTOR.
D) Black, Phillips, Bind S-tite with S.W & P.W. M3x6:
B
B
Figure 3-163. Removing the TAKE-UP REEL MAIN BOARD Unit
DISASSEMBLY & ASSEMBLY
2 pcs
4 pcs
2 pcs
TAKE-UP REEL
MAIN BOARD Unit
Connector
Disassembly and Assembly Procedure
Motor Mounting Plate
C-Ring
Figure 3-164. Removing the Motor Mounting Plate
TAKE-UP REEL MOTOR
Figure 3-165. Removing the TAKE-UP REEL MOTOR
Revision B
C
Motor Mounting Plate
Gear
D
Gear
Confidential
193