Left Base Cover - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.2.16 LEFT BASE COVER

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Remove the LEFT UPPER COVER & LEFT ROLL COVER.
7. Remove the REAR LEFT LOWER COVER.
8. Remove the LEFT LOWER COVER.
9. Remove the two screws, and remove the LEFT BASE COVER.
A) Silver M3x8 S-tite screw with built-in washer: 2 pcs
Pay attention to the positioning points (See below figure).
Positioning point
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p101)
(p104)
(p98)
LEFT BASE COVER
Positioning point
Disassembly and Assembly Procedure
LEFT BASE COVER
A
Figure 3-29. Removing the LEFT BASE COVER
Revision B
A
102
Confidential