Sub Board - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.3.4 SUB BOARD

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Remove the LEFT UPPER COVER & LEFT ROLL COVER.
7. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
8. Unlock the CR UNIT. (p83)
9. Remove the CR COVER. (p122)
10. Move the CR UNIT to the left end.
11. Remove the two screws, and remove the CR Front Frame.
A) Silver M3x8 S-tite screw with built-in washer: 2 pcs
Pay attention to the positioning points (See below figure,
3-44).
Positioning point
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p101)
(p95)
Figure
CR Front Frame
Positioning point
Front Support Frame
Disassembly and Assembly Procedure
CR Front Frame
A
Positioning point
CR UNIT
Front Support Frame
Figure 3-44. Removing the CR Front Frame
Revision B
A
Positioning point
115
Confidential