Main-B Board - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.3.2 MAIN-B BOARD

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
6. Remove the REAR RIGHT LOWER COVER.
7. Remove the PSH BOARD. (p118)
8. Disconnect the USB Cable from the connector (CN6) of the MAIN-B BOARD.
9. Remove the four screws, and remove the MAIN-B BOARD.
A) Silver M3x6 screw: 4 pcs
CN6
A
A
USB Cable
Figure 3-42. Removing the MAIN-B BOARD
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p95)
(p99)
MAIN-B BOARD
A
A
Disassembly and Assembly Procedure
Revision B
113
Confidential