Carriage Mechanism / Ink System Mechanism; Cr Cover - Epson SC-T7000 series Service Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series

3.4.4 Carriage Mechanism / Ink System Mechanism

3.4.4.1 CR COVER

1. Remove the UPPER LEFT COVER.
2. Remove the UPPER SUPPORT R COVER.
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Remove the LEFT UPPER COVER & LEFT ROLL COVER.
7. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
8. Unlock the CR UNIT.(p83)
9. Move the CR UNIT on the Platen.
10. Remove the two screws, and remove the CR COVER.
A) Silver M3x8 P-tite screw with built-in washer: 2 pcs
DISASSEMBLY & ASSEMBLY
(p100)
(p94)
(p101)
(p95)
Disassembly and Assembly Procedure
A
A
Figure 3-53. Removing the CR COVER
Revision B
CR COVER
CR UNIT
122
Confidential