Epson SC-T7000 series Service Manual page 150

SC-T7000 series/SC-T5000 series/SC-T3000 series
17. Remove the four screws that secure the IC HOLDER.
B) Silver M3x6 S-tite screw with built-in washer: 4 pcs
18. Pull the IC holder slightly toward you.
B
B
Figure 3-99. Removing the IC HOLDER (1)
DISASSEMBLY & ASSEMBLY
Front side
B
B
IC HOLDER
Disassembly and Assembly Procedure
When the INK TUBE is removed at the following step, ink may
C A U T I O N
drip off from the tube. Prepare a waste cloth or the like in advance
and be careful not to contaminate the surroundings.
19. Remove the two screws, and remove the INK TUBE from the IC HOLDER.
C) Silver M2.5x16 Machine screw: 2 pcs
20. Remove the IC HOLDER while pulling out the FFC.
IC HOLDER
Figure 3-100. Removing the IC HOLDER (2)
Revision B
INK TUBE
C
C
Confidential
150