Menu Descriptions; Print Queues Menu - Epson SureColor SC-T3000 User Manual

SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide

Menu Descriptions

Print Queues menu

Item
*
XXXXXXXXXXX (name of
Print Queue
queued print job)
* View Hold
Hold Queue
Queue
Resume All Jobs
* XXXXXXXXXXX (name of
Saved Job Queue
stored print job)
Using the Control Panel Menu
Description
Waiting Job Name
User
Estimated Start
Time
Estimated Print
Time
Printing
Availability
XXXXXXXX Paused Job Name
XXX (name
User
of held
Paper Type
print job)
Source
Size
Reason For Hold
Press the Z button to resume all held jobs currently in the queue.
Stored Job Name
User
Length
Pages
Paper Type
Copies
Source
Size
Estimated Print
Time
104
Lists the estimated start time and time needed to
print the selected job.
It also predicts whether the job can be completed
without replacing paper, ink or the Maintenance
Box. Printing can proceed even if Can Not
Complete is displayed. However, the printer may
run out of ink or paper during printing.
Remote Manager and the LFP HDD Utility display
the reason for the Can Not Complete message and
allow you to hold or cancel the job.
"The Purpose of the Hard Disk Unit" on
U
page 55
The printer will only predict availability on the
basis of the amount of paper remaining if On is
selected for Roll Paper Remaining.
The printer will not predict availability on the basis
of the amount of ink remaining when documents
are printed using LFP Print Plug-In for Office or
EPSON CopyFactory5.
This option is available only if On is selected for
Store Held Job in the Setup menu,
Displays the print settings for held jobs and the
reason the job is held.
Jobs that are held because the job print settings
differ from those currently selected for the printer
can be printed as described below.
(1) Replace the paper and take whatever other
steps may be necessary to ready the device for
printing.
(2) Select Resume All Jobs.
Shows the status of the selected stored job when it
was last printed.
After viewing the job, press the Z button to enter
the number of copies. Press the u/d buttons to
choose the number of copies and press the Z
button to display the estimated print time and
print availability. Press the Z button to start
printing.