SC-T7000 series/SC-T5000 series/SC-T3000 series
3.4.4.3 PRINT HEAD
When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p199)
perform the specified operations including required adjustment.
Be careful not to touch the nozzle surface of the PRINT HEAD.
C A U T I O N
1.
Perform the Tube inner pressure reduction.
2.
Remove the UPPER LEFT COVER.
3.
Remove the UPPER SUPPORT R COVER.
4.
Remove the PANEL BOARD.
(p120)
5.
Remove the TOP COVER.
(p85)
6.
Remove the FRONT COVER.
(p86)
7.
Remove the LEFT UPPER COVER & LEFT ROLL COVER.
8.
Remove the RIGHT UPPER COVER & RIGHT ROLL COVER.
9.
Unlock the CR UNIT.
(p83)
10. Remove the CR COVER.
(p122)
11. Remove the DAMPER KIT.
(p123)
12. Disconnect the HEAD FFCs from the four connectors of the PRINT HEAD.
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p248)
(p100)
(p94)
(p101)
(p95)
Disassembly and Assembly Procedure
Connector
Figure 3-59. Removing the HEAD FFC
13. Remove the three screws, and remove the PRINT HEAD.
A) Silver M2.6x8 Machine screw: 3 pcs
Upper side
A
Figure 3-60. Removing the PRINT HEAD
Revision B
HEAD FFC
Connector
PRINT HEAD
A
PRINT HEAD
A
Confidential
126