Epson SureColor SC-T3000 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. SC-T3000
  6. User manual

Epson SureColor SC-T3000 User Manual

24- inch, 4- colour printer
Hide thumbs Also See for SureColor SC-T3000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Setup Manual
User's Guide
NPD4669-00 EN

Advertisement

Table of Contents
loading

Related Manuals for Epson SureColor SC-T3000

Summary of Contents for Epson SureColor SC-T3000

  • Page 1 User's Guide NPD4669-00 EN...
  • Page 2 (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

  • Page 3: Table Of Contents

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Contents Contents Adjusting Settings..... . . 35 Copyrights and Trademarks Replacing Paper......36 Using the Paper Basket.
  • Page 4 Usable Commercially Available Paper Size..145 Using Epson Printer Utility 4....97 Before printing on non-Epson media..146 Starting Epson Printer Utility 4.
  • Page 5 Technical Support Web Site....151 Contacting Epson Support....151 Before Contacting Epson.

  • Page 6: Introduction

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction ❏ Keep the entire computer system away from Introduction potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. Important Safety ❏ Use only the type of power source indicated on the product’s label.

  • Page 7: When Handling The Ink Cartridges

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction ❏ Always turn the product off using the Power button Note on this Guide on the control panel. When this button is pressed, the Power light flashes briefly then goes off. Do not unplug the power cord or turn off the product until Meaning of Symbols the Power light stops flashing.
  • Page 8 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Macintosh refers to Mac OS X. ❏ Mac OS X refers to Mac OS X 10.5.8 and later versions.

  • Page 9: Printer Parts

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Printer Parts Front section Printer cover Open this cover when cleaning the printer or clearing jams. Poster board support Raise this support so that you can place the media on it when printing on poster board. The support ensures that poster boards feeds smoothly.
  • Page 10 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Paper basket Output from the printer collects in this basket, keeping the media clean and free of creases. It can hold up to 20 sheets of plain paper printed in line drawing mode. The optional Stand (24”) for the SC-T3000 Series comes with a paper basket.
  • Page 11 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Green : 1000Base-T USB port Connect the USB cable here. Control panel “Using the Control Panel” on page 40 Alert lamp This lamp lights or flashes when an error occurs. Lights or : An error has occurred. How the lamp lights or flashes varies with the type of error. The control panel flashes displays a description of the error.

  • Page 12: Roll Paper Adapter

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Roll paper adapter Control panel Use the supplied roll paper adapter when loading roll paper onto the printer. “Loading Roll Paper” on page 24 Adapter lock lever Lift to unlock, lower to lock. Unlock when attaching roll paper to the adapter, lock once the roll is attached.

  • Page 13: Screen View

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Screen Displays the Maintenance menu, which is used for Displays the printer’s status, menus, error messages, nozzle checks and head cleaning. and so on. U “Screen View” on page 13 “Adjusting the Print Head” on page 114 Menu button Displays the menu for the tab currently selected in W button (Pause/Cancel button)
  • Page 14 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Displays the printer’s status, operation, and error . : The Paper Tab This tab shows the type of paper in the printer messages. and can be used to access the Paper menu. “What to Do When a Message Is Displayed” on The Info Display Area page 125 The paper tab info display area shows the...
  • Page 15 Maintenance Box. : Non-genuine cartridge. : Maintenance Box is at the end of Epson recommends the use of its service life. Replace the genuine Epson ink Maintenance Box with a new one. cartridges.Epson cannot...

  • Page 16: Features

    The printer does not have to be moved to allow rear access. Thanks to newly developed EPSON UltraChrome XD Ink technology, the printer can be used for high-quality Choose from three sizes of cartridge according to the posters and CAD drawings.

  • Page 17: Notes On Usage And Storage

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction New printer driver offers greatly improved Notes on Usage and ease-of-use Print settings can be optimized simply by choosing the Storage desired use or target. This spares you the trouble of adjusting print settings individually. Installation space On startup, the printer driver automatically checks the status of the paper loaded in the printer and displays it in...

  • Page 18: Notes When Using The Printer

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction ❏ If you do not print for a long time, the print head Notes when using the printer nozzles may become clogged. We recommend that you print once a week to prevent the print head Note the following points when using this printer to from clogging.

  • Page 19: Notes On Handling Paper

    ❏ To ensure good results, use all the ink in the Notes on Handling cartridge within a year of installation. ❏ Use Epson special media under normal room ❏ Ink cartridges that have been stored at low conditions (temperature: 15 to 25˚C; humidity: 40 temperatures for an extended period should be to 60%).
  • Page 20 Typically, print outs and photos fade over time (color distortion) due to the effects of light and various constituents in the air. This also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be minimized.

  • Page 21: Introducing The Supplied Software

    The printer driver is required when using the printer. It can be installed by selecting Install during setup. “Summary of the Printer Driver” on page 23 EPSON LFP Remote Panel 2 This application is used for custom paper settings and to update printer firmware. Epson Network Utilities Select this option during installation if the printer and computer are connected via a network.
  • Page 22 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction Software Name Epson Network Utilities Select this option during installation if the printer and computer are connected via a network. Installing this utility allows a wizard to be used to simplify the process of setting the addresses needed for network connections.

  • Page 23: Summary Of The Printer Driver

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Introduction ❏ Allows the user to execute printer maintenance Summary of the Printer Driver functions to maintain print quality, and check the printer’s status and so on. The main functions of the printer driver are described below.

  • Page 24: Basic Operations

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Open the roll paper cover. Basic Operations Loading and Removing the Roll Paper Confirm that the adapter holder lock lever is Loading Roll Paper raised. Load roll paper after attaching the supplied roll paper adapters.
  • Page 25 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations 2-inch core Slide the roll paper right until it contacts the adapter guides. Following the adapter guide, slide the roll slowly to the opposite side. Raise the adapter lock lever to release the lock on each of the two roll paper adapters.

  • Page 26: Cutting The Roll Paper

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Pull the paper straight through until the leading Following the on-screen instructions, press the edge of the paper reaches the lines on the poster Z button. board supports as shown. The paper will be fed into the printer. Close the roll paper cover.
  • Page 27 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations ❏ Manual cut: Buttons that are used in the following settings Press the ) button to cut the paper using the built-in cutter. A cutline is printed for manual cutting and can be used as a guide when cutting paper using the built-in cutter.

  • Page 28: Removing The Roll Paper

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Open the roll paper cover. Removing the roll paper This section describes how to remove and store roll paper after printing. The pressure rollers may leave impressions on paper that is left in the printer. Buttons that are used in the following settings Note: When removing the roll paper, you can use the...

  • Page 29: Loading And Removing Cut Sheets

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Lift the adapter lock levers to release the roll Loading and Removing paper adapters. Cut Sheets The procedure for loading and positioning cut sheets varies with the thickness of the paper. 0.08 to 0.8 mm U “Loading Cut Sheets”...
  • Page 30 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Turn on the printer by pressing the P button. Feed the paper into the paper slot with the printable surface toward you. Note: Insert the paper into the paper slot, keeping its ❏...

  • Page 31: Removing Cut Sheets

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Loading and Removing Removing Cut Sheets Poster Board This section describes how to remove cut sheets when printing is complete. This section describes how to load and remove poster board from 0.9 to 2.1 mm thick. Note: To remove paper that was loaded but not used, press the The printer can be used with board of the following...
  • Page 32 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Raise all the poster board supports. Note: The paper that can be used in the printer is detailed in the Press the supports diagonally downwards and following section. then lift them straight up. “Supported Media”...
  • Page 33 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Insert the board, using the edge to keep the Close the printer cover. supports pressed down. Position the trailing and right edges of the board as shown by the loading indicators. Center the right edge over the groove to the right of the paper eject guide and align the trailing edge with the ends of poster board supports, as shown.

  • Page 34: Removing Poster Board

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Pull the poster board forward as shown in the Removing Poster Board on-screen instructions. After removing the poster board, press the Z This section describes how to remove poster board button. when printing is complete. Important: Note: If poster board will not be used in the next...

  • Page 35: Viewing And Changing Media Settings

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations ❏ Time until replacement Viewing and Changing The following settings are recorded in a barcode Media Settings printed on the roll. The amount of paper remaining, the value selected The following is displayed in the control panel after for remaining alert, and the paper type.

  • Page 36: Replacing Paper

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Select an option. Replacing Paper To print at current settings Press the d/u buttons to highlight Keep Settings This section describes how to replace paper. The process Above and press the Z button. for removing the current paper differs with the type of paper loaded;...

  • Page 37: Using The Paper Basket

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Cut Sheets Using the Paper Basket Cut sheets are automatically ejected to the rear, where they can be removed by hand. The paper basket collects paper from the printer, Poster Board preventing it falling to the floor and becoming creased Poster board is partially ejected to the front.
  • Page 38 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Important: Press the paper basket to the opposite side. The paper basket will not function correctly when opened to the position shown below at right. Stop when the paper basket is in the position shown below at left.

  • Page 39: Using The Auto Take-Up Reel Unit (Sc-T7000 Series Only)

    See the following section for information on take-up support and take-up direction. “Epson Special Media Table” on page 139 Forward Backward Forward takes up the roll with the printable side out.

  • Page 40: Using The Control Panel

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Backward : The roll is taken up with the printable Important: side in. Confirm that the end of the roll is cut straight across. The unit will not function as expected if the Forward : The roll is taken up with the printable end of the roll is wavy or curved.
  • Page 41 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Tape the end to the roll core. Buttons that are used in the following settings Place tape (available from third-party suppliers) at the center and then at the left and right ends. Set the auto take-up reel unit Auto switch to Off.
  • Page 42 See the following section for information on paper that requires the tensioner. “Epson Special Media Table” on page 139 Set the Auto switch to Forward. Set the auto take-up reel unit Auto switch to Off.

  • Page 43: Removing Paper From The Auto Take-Up Reel Unit

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Tape the end to the roll core. Set the Auto switch to Backward. Place tape (available from third-party suppliers) at the center and then at the left and right ends. Removing Paper from the Auto Take-up Reel Unit Keep the d button in the control panel pressed until you have fed enough paper for about three...
  • Page 44 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Set the Auto switch to Off. Remove the roll core from the auto take-up reel unit. Cut the paper and take it up until it is all on the auto take-up reel unit roll core. “Manual cut method”...

  • Page 45: Basic Printing Methods(Windows)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Basic Printing Methods After confirming that the printer is selected, click Printer properties or Properties to display the (Windows) Printer Settings tab. Printing is performed from the application used to create the document you wish to print. The basic procedure is described below.
  • Page 46 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Advanced fit and borderless settings are available In the Size Settings area, choose the desired in the Layout tab. Paper Size. “Enlargements and Horizontal and Vertical Choose the Paper Size selected when the Banners”...
  • Page 47 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations An error message is displayed if an error occurs or an ink Click the OK button. cartridge needs replacing while printing. When settings are complete, click Print. The progress bar is displayed, and printing starts. Screen while printing The following screen is displayed when you start printing, and the progress bar (the computer’s...

  • Page 48: Basic Printing Methods(Mac Os X)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations For Mac OS X 10.6 and 10.5, click the arrow ( Basic Printing Methods to make settings on the Page Setup screen. (Mac OS X) Turn on the printer, and load the paper. “Loading Roll Paper”...
  • Page 49 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations XXXX (cut sheet): Print with margins on cut If the desired settings are not displayed, replace sheets. Print with top, right, and left margins of 3 the media in the printer with the desired paper mm and a bottom margin of 14 mm.
  • Page 50 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Also, if an error occurs while printing, a notification message is displayed.

  • Page 51: Printable Area

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Printable area Roll Paper Margin Margin Values Parameter Normal = 15 mm This section describes the printable areas for the printer. = 3 mm If the margin set in an application is larger than the following setting values, sections beyond the specified Top15mm/Bottom15mm = 15 mm...

  • Page 52: Turning Off The Power Using Power Off Timer

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations The arrow in the illustration indicates the direction of Turning Off the Power the ejected paper. Using Power Off Timer The printer offers the following two power management options. ❏ Sleep mode The printer enters sleep mode when there are no errors, no print jobs being received, and no control panel or other operations performed.

  • Page 53: Canceling Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations About Power Management Canceling Printing You can adjust the time before Power Management is applied. Any increase will affect the printer’s energy efficiency. Please consider the environment before There are a few ways to stop printing operations making any change.
  • Page 54 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Basic Operations Canceling from the computer (Mac OS X) Click the printer icon in the Dock. Select the job you want to cancel, and then click Delete. If the job has been sent to the printer, print data is not displayed on the above screen.

  • Page 55: Using The Optional Hard Disk Unit

    Hard Disk Unit printer. It is used when the printer is connected to the computer via USB. It can be downloaded from the Epson website. The Purpose of the Hard http://www.epson.com Disk Unit...

  • Page 56: Saving Print Jobs To The Hard Disk Unit

    For information on other applications, see the software documentation or online help. ❏ LFP Print Plug-In for Office ❏ EPSON CopyFactory5 Saving Print Jobs to the Hard Disk Unit This section describes the print driver settings used to save print jobs.

  • Page 57: Viewing And Printing Saved Print Jobs

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Optional Hard Disk Unit In the Advanced tab, click the Settings button in Press the d/u buttons to highlight Saved Job the Hard Disk Unit area and select Print and Queue and press the Z button. Save or Save only.

  • Page 58: More Ways To Print

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print ❏ Fit to Output Size More Ways to Print Automatically enlarges or reduces the image size to fit the paper size. Enlargements and Horizontal and Vertical Banners The printer driver can enlarge or reduce documents for different paper sizes.

  • Page 59: Fitting Documents To The Width Of The Roll Paper

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Choose whether to fit the short or long edge of Fitting Documents to the Width the document to the roll paper width. of the Roll Paper Making Settings in Windows Display the printer driver’s Printer Settings tab and select a Paper Size that matches the document page size.

  • Page 60: Choosing A Print Size

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Select Fit to Roll Paper Width and choose In the Layout tab, select Reduce/Enlarge and whether to fit the short or long edge of the click Specify Size. document to the roll paper width. Choose an input method and select a size.

  • Page 61: Fitting Documents To The Output Size

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Select Specify Size, choose a method for In the Layout tab, select Reduce/Enlarge and specifying the size, and select a size. click Fit to Output Size. Enter a value directly or click the arrows to the right of the scale box to set the value.

  • Page 62: Making Enlarged Copies With A Scanner

    Select Fit to Output Size and choose a paper size Making Enlarged Copies that matches the paper in the printer. with a Scanner Connect an Epson scanner to the printer makes creating enlarged copies a snap; no computer is required. Supported scanners are listed on the Epson website. http://www.epson.com...

  • Page 63: Making Enlarged Copies

    The devices may be turned on in any order. Load the printer with paper that supports enlarged copies. Placing Documents in the “Epson Special Media Table” on page 139 Scanner Place the original on the scanner glass or in the Failure to observe the following precautions when auto document feeder (ADF).

  • Page 64: Printing At Non-Standard Sizes

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print ❏ A4/2->Banner(Auto) is selected for Auto. Printing at Non-Standard ❏ B1, A0, or A0 (2 Sheets) is selected for Sizes Output Size ❏ The original is 4 by 6 size Before printing at non-standard sizes, including vertical or horizontal banners and documents with equal sides, ❏...
  • Page 65 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Making Settings in Windows Note: Display the printer driver’s Printer Settings tab ❏ To change the paper size you saved, select the and click the Custom Paper Size. paper size name from the list on the left. ❏...

  • Page 66: Printing Cad Drawings

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Enter the Width, Height for the Paper Size, and Printing CAD Drawings enter the margins, and then click OK. The range of values available for page sizes and The printer supports the HP-GL/2 driver and HP RTL margins vary with the printer model and the (Raster Transfer Language) used in plotters.

  • Page 67: Borderless Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Making Settings for Mac OS X Borderless Printing Display the print dialog and select Printer Settings from the list. You can print your data without margins on the paper. “Basic Printing Methods(Mac OS X)” on page 48 The types of borderless printing you can choose vary as shown below depending on the media type.

  • Page 68: Supported Media Sizes For Borderless Printing

    Depending on the media type, the print quality may enlargement by the printer driver. decline or borderless printing cannot be selected. “Epson Special Media Table” on page 139 Supported Media Sizes for Borderless Printing The following media sizes are supported for borderless printing.

  • Page 69: About Roll Paper Cutting

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print About Roll Paper Cutting When performing borderless printing on roll paper, you can specify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver’s Roll Paper Option. The cutting operation for each value is shown in the following chart.

  • Page 70: Setting Procedures For Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print In the Layout tab Borderless Enlargement Setting Procedures for Printing Setting area, select either Auto Expand or Retain Size. Making Settings in Windows Display the printer driver’s Printer Settings tab and adjust the following settings.
  • Page 71 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print : 3 mm for left and 5 mm for right (the When roll paper is used, Auto Cut options are image shifts 1 mm to the right) available in the Advanced tab Roll Paper Option area.

  • Page 72: Correct Color And Print

    “Color Management Printing” on page 84 Example of Adobe Photoshop CS5 If EPSON Standard (sRGB)/Business Graphics/Line Drawing is selected for Color Mode, a Settings button Open the Print screen. will be displayed.
  • Page 73 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Select Color Management and then Document. Clicking the Settings button allows you to adjust Select Printer Manages Colors as the Color Gamma, Brightness, Contrast, Saturation, Handling setting, and then click Print. color balance, and other settings.
  • Page 74 More Ways to Print Note: Note: For information on supported platforms, see the EPSON Color Controls will not be available in the website for the application in question. following applications if Step 1 is omitted. ❏ Adobe Photoshop CS3 or later ❏...

  • Page 75: Multi-Page/Poster Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Make the necessary settings. Multi-Page/Poster Printing See the printer driver help for more details on each item. You can print multiple pages on a single sheet or a single page across multiple sheets. The following three multi-page/poster printing methods are available.

  • Page 76: Folded Double-Side (Windows Only)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print • Poster (Windows only) In the Folded Double-Side Setting dialog, select A single page can be printed across multiple sheets. the Binding Edge and Binding Margin. The sheets can then be joined together to large posters (up to 16 times the original size).

  • Page 77: Poster (Windows Only)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print In the Print Layout dialog, select the Number of Poster (Windows only) pages per sheet and Page Order. In the printer driver’s Layout tab, select Page If the Print page frames check box is selected, Layout.
  • Page 78 “Supported Media Sizes for Borderless Printing” on page 68 “Epson Special Media Table” on page 139 ❏ If Single Cut or Double Cut is selected for Auto Cut, the paper will be cut 1 or 2 mm inside the image, resulting in imperfect joins.
  • Page 79 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print The following describes how to join four printed pages Lay the upper left sheet on top of upper right together. sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back.
  • Page 80 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Repeat steps 1 to 4 for the lower sheets. With the two sheets overlapping, trim the excess by cutting along the line joining the two cut guides (the lines above the X marks). Trim the bottom from the upper sheets by cutting along the line joining the join guides (the centers of the X marks).

  • Page 81: Printing Multiple Documents (The Layout Manager)(Windows Only)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print After joining all the sheets, trim off the borders by Printing Multiple cutting along the cut guides (outside the X Documents (the Layout marks). Manager) (Windows Only) Documents created in different applications can be printed together in your choice of layout.

  • Page 82: Setting Procedures For Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print The overall size and placement of the objects can Setting Procedures for Printing be changed using the Preferences and Arrangement options in the File menu. Open the file you want to print in your application.
  • Page 83 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide More Ways to Print Saving On the Layout Manager screen, click File menu and then Save As. Enter the file name, select the location, and then click Save. Close the Layout Manager screen. Opening saved files Right-click the Utility shortcut icon on the Windows Taskbar ( ), and then click Layout...

  • Page 84: Color Management Printing

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Color Management Printing Color Management Print Color Management Settings Printing You can perform color management printing using this printer’s printer driver in the following two ways. About Color Management Choose the best method according to the application you are using, the operating system environment, the Even when using the same image data, the original aim of the print out and so on.

  • Page 85: Setting Profiles

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Color Management Printing Setting color Setting profiles management with the Settings for the input profile, printer profile, and intent (matching method) vary between three types of color applications management printing since their color management engines are used differently.

  • Page 86: Setting Color Management With The Printer Driver

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Color Management Printing Set color management to off. Setting color management with the For Windows In the Printer Settings tab, select Advanced printer driver Settings in the Print Quality area and choose Off (No Color Management) for Color Mode. Color management printing by Host ICM (Windows) Use image data in which an input profile has been...

  • Page 87: Color Management Printing By Colorsync

    Select Color Matching from the list, and then click ColorSync. Select Host ICM. When Epson special media is selected for Media Type in the Printer Settings tab, the printer profile corresponding to the media type is automatically selected and displayed in the...

  • Page 88: Color Management Printing By Driver Icm(Windows Only)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Color Management Printing Adobe Photoshop CS3 or later Choose Printer Settings from the list and select Adobe Photoshop Elements 6 or later Advanced Settings for Mode. Select Off (No Adobe Photoshop Lightroom 1 or later Color Management) for Color Mode.
  • Page 89 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Color Management Printing In the printer driver’s Printer Settings tab, select Intent Explanation Advanced Settings for Print Quality, then select ICM for Color Mode and click Settings. Absolute Assigns absolute color gamut Colorimetric coordinates to the original and print data and converts the “Basic Printing Methods(Windows)”...

  • Page 90: Tips For Using The Printer Driver(Windows)

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Tips for Using the Printer Driver(Windows) For Windows XP Tips for Using the Click Start, Control Panel, Printers and Other Hardware, and then Printers and Faxes. Printer Driver Note: (Windows) If your Windows XP Control Panel is in Classic View, click Start, Control Panel, and then Printers and Faxes.

  • Page 91: Displaying Help

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Tips for Using the Printer Driver(Windows) Displaying Help Right-click on the item you want to check and display You can access the printer driver help in the following Right-click the item, and then click Help. ways: ❏...

  • Page 92: Customizing The Printer Driver

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Tips for Using the Printer Driver(Windows) You can save up to 100 settings. You can choose a setting Customizing the Printer you have registered from the Select Setting list box. Driver Note: You can save the settings as a file by clicking Export. You You can save the settings or change the display items as can share the settings by clicking Import to import the you prefer.

  • Page 93: Rearranging Display Items

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Tips for Using the Printer Driver(Windows) Adjust settings for the new custom media and Rearranging display items click OK. To display frequently used items right away, you can arrange Select Setting, Media Type, and Paper Size as follows.

  • Page 94: Overview Of The Utility Tab

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Tips for Using the Printer Driver(Windows) ❏ To delete a group (folder), click Delete Overview of the Utility Group. ❏ Drag and drop unnecessary items to Not Display. The printer driver’s Utility tab provides access to the following.
  • Page 95 EPSON LFP Remote Panel 2 You can update the printer’s firmware and make custom paper settings. See the EPSON LFP Remote Panel 2 help for details. Note: If EPSON LFP Remote Panel 2 and Printer Firmware Update are grayed out, EPSON LFP Remote Panel 2 is not installed.

  • Page 96: Uninstalling The Printer Driver

    Select the software you want to remove and then click Uninstall/Change (or Change/Remove/ Add or remove). You can remove EPSON Status Monitor 3 and the printer driver by selecting EPSON SC-XXXXX Printer Uninstall. Select EPSON LFP Remote Panel 2 to remove...

  • Page 97: Tips For Using The Printer Driver(Mac Os X)

    Tips for Using the Printer Driver (Mac OS X) You can perform maintenance tasks such as Nozzle Check or Head Cleaning by using Epson Printer Utility 4. This utility is installed automatically when you install the printer driver. Displaying the Settings...

  • Page 98: Uninstalling The Printer Driver

    Panel 2 “Cleaning the print head” on page 115 Drag and drop the EPSON Remote Panel 2 folder from the Applications folder into the Trash. Head Cleaning If you see banding or gaps in the print outs, perform head cleaning.

  • Page 99: Using The Control Panel Menu

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Using the Control Panel Menu Menu Operations The steps for displaying the various menus are shown below. The example below shows the steps for accessing the Paper menu. *1 Available when optional hard disk unit is installed. *2 Standard menu (displayed if optional hard disk unit is not installed).

  • Page 100: Menu List

    Roll Paper Displays instructions for loading the paper. Cut Sheet (up to 0.8 mm thick) Poster Board Select Paper Photo Paper Lists supported Epson media. Type Matte Paper Plain Paper Others Custom Paper Lists the names of user-defined custom paper types.
  • Page 101 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Menu item Description Custom Paper XXXXXXXXXXXX Select Reference Photo Paper Lists supported Epson Setting XXXXXXXX Paper media. Matte Paper (name of custom paper type) Plain Paper Others No Paper Selected...
  • Page 102 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu /Setup menu “Setup menu” on page 107 Menu item Description Printer Setup Roll Paper Setup Auto Cut On, Off Refresh Margin On, Off Page Line On, Off Roll Paper Margin Normal, Top15mm/Bottom15mm, Top 35 mm/Bottom 15 mm, Top 45 mm/Bottom 15 mm, 3mm, 15mm Roll Paper Remaining...
  • Page 103 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Menu item Description Administrator Change Password Enter a password. Menu Operational Network Setup Password Required, No Password Required Control Power Cleaning Manage HDD Format Hard Disk Yes, No Date And Time MM/DD/YY HH:MM Time Zone Enter the time difference between GMT and the current time...

  • Page 104: Menu Descriptions

    Roll Paper Remaining. The printer will not predict availability on the basis of the amount of ink remaining when documents are printed using LFP Print Plug-In for Office or EPSON CopyFactory5. View Hold XXXXXXXX Paused Job Name This option is available only if On is selected for...

  • Page 105: Paper Menu

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Print Job Log Sheet Press the Z button to print the print job log. * Displayed only when optional hard disk unit is installed. Paper menu indicates factory default settings. Item Description Load/Remove Paper...
  • Page 106 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Paper Feed Pattern Use this setting if you are unable to resolve Adjust banding issues (horizontal striped lines or uneven Value colors) in the standard print area (for cut sheets, the area excluding the 1 to 2 cm strip at the bottom of the paper) even after head cleaning or head alignment.

  • Page 107: Maintenance Menu

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Restore Restore the selected custom paper settings to Settings default values. Print Paper List Press the Z button to print a list of custom paper settings. Maintenance menu Item Description Nozzle Check...
  • Page 108 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu indicates factory default settings. Item Description Printer Setup Roll Paper Auto Cut Choose On to automatically cut roll paper using Setup the built-in cutter as each page is printed, Off to disable auto paper cutting.
  • Page 109 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Remaining 1 to 15 m (4 to 50 ft) Displayed when On is selected for Roll Paper Alert Remaining. Set within a range from 1 to 15 m (4 to 50 ft) to display a warning when the amount of remaining roll paper drops below that limit.
  • Page 110 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Store Held This item is available when an optional hard disk unit is installed. If On is selected, print jobs that require a paper type, source, or output paper size (width) that differs from those currently selected with the printer will be saved as held jobs;...
  • Page 111 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu Item Description Power Settings Sleep Mode 5 to 180 minutes The printer enters sleep mode automatically when there are no errors, no print jobs being received, and no control panel or other operations are performed for the selected period.

  • Page 112: Enlarged Copy Menu

    Selecting Administrator Menu displays a password prompt. The Admin- istrator Menu will only be displayed if the correct password is entered, preventing non-administrators from accidentally changing settings. Keep the password in a safe place. Should you forgot the password, contact your dealer or Epson Support. Operation Network Password...
  • Page 113 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Using the Control Panel Menu indicates factory default settings. Item Description Color/B&W Color Choose whether to copy in color or in black and white. B&W Auto A3->Auto,B4->Auto,A4->Au- With Border Document sizes are listed to the left of the arrows. to,B5->Auto,A5->Auto,LTR->Au- The copy is enlarged to fit the width of the roll Borderless...

  • Page 114: Maintenance

    Maintenance Explanations in this section use the Windows printer driver as an example. Use Epson Printer Utility 4 for Mac OS X. Adjusting the Print Head “Epson Printer Utility 4 Functions” on page 97 You need to adjust the print head if white lines appear in...

  • Page 115: Cleaning The Print Head

    When left for some time, the Head Cleaning and clean the print head. U clogged ink may dissolve. “Cleaning the print head” on page 115 If the nozzles are still clogged, contact your dealer or Epson Support.

  • Page 116: Minimizing Print Misalignments (Head Alignment)

    The Maintenance menu will be displayed. driver as an example. Press the d/u buttons to highlight Head Use Epson Printer Utility 4 for Mac OS X. Cleaning and press the Z button. “Using Epson Printer Utility 4” on page 97 You will be prompted to choose nozzle rows.
  • Page 117 Explanations in this section use the Windows printer driver as an example. ❏ From the computer Use Epson Printer Utility 4 for Mac OS X. A computer can be used for auto head alignment. “Using Epson Printer Utility 4” on page 97 In most cases, head alignment can be performed successfully with just this operation.
  • Page 118 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance Click Print Head Alignment from the Utility Press the Z button to print an adjustment pattern. tab in the printer driver’s Properties (or Printing preferences) screen. If Auto is selected, the printer will automatically Follow the on-screen instructions to align the align the head as it prints the head alignment print head.

  • Page 119: Replacing Consumables

    5 cm movements as shown in the illustration. Important: Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and under certain...

  • Page 120: Replacing Maintenance Boxes

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance “Options and Consumable Products” on Holding the cartridge with the label out, slide it page 137 all the way into the slot. Match the color of the ink cartridge to the color of Important: the label on the printer.

  • Page 121: Replacing The Cutter

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance Place the used Maintenance Box in the clear bag Important: included with your new Maintenance Box, and Take care not to damage the cutter blade. Dropping make sure that the zipper is closed tight. it or knocking it against hard objects may chip the blade.
  • Page 122 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance Caution: Do not store the cutter within the reach of children. The cutter’s blade could cause an injury. Pay careful attention when replacing the cutter. After replacing the cutter, press the Z button. The cutter will return to its original position.

  • Page 123: Cleaning The Printer

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance Cleaning the Printer Press the ) button followed by the d button. Paper is fed while the d button is pressed. If the paper is not soiled, cleaning is complete. To keep your printer in optimum operating condition, clean it (about once a month).
  • Page 124 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Maintenance Important: ❏ Be sure not to touch the roller or the ink absorbing areas (b, shown in gray) during cleaning; otherwise, prints may be soiled. ❏ Be careful not to touch the ink tubes inside the printer, otherwise, the printer may be damaged.

  • Page 125: Problem Solver

    Use EPSON LFP Remote Panel 2 to re-attempt the update. the printer. If this message appears on the LCD panel again, contact your dealer or Epson Support. Command Error Press the W button and select Job Cancel to stop printing. Confirm that the printer driver Check driver settings.
  • Page 126 If this message appears on the LCD panel again, contact your dealer or Epson Support. To print regardless of hard disk status, select the Advanced tab in the printer driver, open the Settings dialog of Hard Disk Unit, and select Print only.

  • Page 127: When A Maintenance Call/Service Call Occurs

    Maintenance Request A part used in the printer is nearing the end of its service life. Replace Part Soon/Replace Part Now Contact your dealer or Epson Support and tell them the maintenance request XXXXXXXX code. You cannot clear the maintenance request until the part is replaced. A service call occurs if you continue to use the printer.
  • Page 128 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Problem Solver Ink system error 14**,162*,1900 Replacement part required 110*, 143* Mechanical error 15**...

  • Page 129: Troubleshooting

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Problem Solver Troubleshooting Does the printer port setting match the printer connection port? Check the printer port. You cannot print (because the Click the Port tab in the printer Properties dialog and check the option selected for Print to following printer does not work) port(s).
  • Page 130 The "Driver Version" shown on the test page is the status. You cannot print in this status. version number of the Windows internal driver. This differs from the Epson printer driver version that you Double-click the printer icon in the Devices and installed.

  • Page 131: The Printer Sounds Like It Is Printing, But Nothing Prints

    Are you using a genuine Epson ink cartridge? pattern can be printed without connecting to a This printer is developed for use with Epson ink computer, you can check the operations and print cartridges. If you use non-Epson ink cartridges, the status for the printer.
  • Page 132 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Problem Solver Have you compared the printing result with Is the paper skewed? If Off is selected for Media Skew Check in the Setup the image on the display monitor? menu, printing will continue even if the paper is Since monitors and printers produce colors skewed, resulting in data being printed off the paper.
  • Page 133 Are you using the printer at normal room temperature? Epson special media should be used at normal room Is the Color Density setting correct? temperature (temperature: 15 to 25˚C, humidity: 40 to Lower the density of the ink in the Paper 60%).

  • Page 134: Feeding Or Ejecting Problems

    Min. “Borderless Printing” on page 67 Is the paper damp? Do not use paper that is damp. Also, Epson special media should be left in the bag until you intend to use Is the paper stored correctly? it. If it is left out for a long time, the paper curls up and The paper may expand or contract if it is not stored gets damp so that it does not feed properly.
  • Page 135 Open the printer cover and move the print head Are you using the printer at normal room away from the jam. temperature? Epson special media should be used at normal room temperature (temperature: 15 to 25˚C, humidity: 40 to 60%). Is paper jammed in the printer?

  • Page 136: Others

    Z button. Reload the paper and resume printing. Should you forget the administrator password, contact your dealer or Epson Support. “Loading and Removing Cut Sheets” on page 29 Head cleaning starts when the printer is turned on.

  • Page 137: Appendix

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of May, 2012) For the latest information, see the Epson Web site. Ink cartridges SC-T7000/SC-T7070/SC-T5000/SC-T5070/SC-T3000/SC-T3070 Capacity Explanation...
  • Page 138 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix Product name Product Explanation number Roll Paper Belt C12C890121 This holder keeps roll paper from unrolling after it is removed from the printer. “Removing the roll paper” on page 28 Hard Disk Unit C12C843911 Use U “Using the Optional Hard Disk Unit”...

  • Page 139: Supported Media

    We recommend you use the following Epson special media for high-quality printing results. Note: For information about the media types and appropriate settings for printing on paper other than Epson special media or when using raster image processing (RIP) software, see the documentation supplied with the paper, or contact the dealer of the paper or the manufacturer of the RIP.
  • Page 140 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix Premium Semigloss Photo Paper (250), 3 inch core Take-up Head Size Thickness Borderless Enlarged ICC Profile Alignment 406mm/16" EPSON 610mm/24" SC-T3000_5000_7000_Serie ✓ ✓ ✓ ✓ ✓ 0.27mm s Premium Semigloss Photo 914mm/36" Paper 250.icc 1118mm/44"...
  • Page 141 Appendix Photo Paper Gloss 250, 3 inch core Take-up Head Size Thickness Borderless Enlarged ICC Profile Alignment 432mm/17" 610mm/24" EPSON ✓ ✓ ✓ ✓ ✓ 0.25mm SC-T3000_5000_7000_Serie 914mm/36" s Photo Paper Gloss 250.icc 1118mm/44" *1 SC-T3000 Series not supported *2 SC-T3000 Series/SC-T5000 Series not supported...
  • Page 142 Enhanced Synthetic Paper, 2 inch core Take-up Head Size Thickness Borderless Enlarged ICC Profile Alignment 610mm/24" EPSON ✓ SC-T3000_5000_7000_Serie ✓ ✓ 0.13mm s Enhanced Synthetic 1118mm/44" Paper.icc *1 SC-T3000 Series/SC-T5000 Series not supported *2 Borderless printing available, but borders may appear or print quality decline due to paper expanding or contracting.
  • Page 143 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix Singleweight Matte Paper, 2 inch core Take-up Head Size Thickness Borderless Enlarged ICC Profile Alignment 432mm/17" EPSON 610mm/24" ✓ SC-T3000_5000_7000_Serie ✓ ✓ ✓ 0.15mm s Singleweight Matte 914mm/36" Paper.icc 1118mm/44" *1 SC-T3000 Series not supported *2 SC-T3000 Series/SC-T5000 Series not supported *3 Use the tensioner supplied with the auto take-up reel unit.
  • Page 144 Appendix Head Name Size Thickness Borderless Enlarged ICC Profile Alignment ✓ Photo Quality Inkjet Super A3/B Paper EPSON SC-T3000_5000_7 ✓ 0.12mm 000_Series Photo Quality Ink Jet ✓ Paper.icc US-C Enhanced Matte 610 × 762 mm EPSON Posterboard (24" × 30") SC-T3000_5000_7 1.30mm...

  • Page 145: Usable Commercially Available Paper Size

    ❏ Although other paper types manufactured by other companies can be loaded in the printer as long as they meet the following specifications, Cut sheet Epson cannot guarantee the paper feeding and print quality. Media types Plain paper and recycled paper...

  • Page 146: Before Printing On Non-Epson Media

    For the paper’s When using non-Epson media (Custom Paper), make characteristics, check the paper’s documentation or the paper configuration according to the paper with your local dealer.

  • Page 147: Notes When Moving Or Transporting The Printer

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix SC-T3000 Series Notes When Moving or Transporting the Printer Perform the following operations when moving or transporting the printer. Position your hands where shown when lifting the printer. SC-T7000 Series/SC-T5000 Series Important: ❏ Only hold the required area; otherwise, the printer may be damaged.

  • Page 148: Notes On Transporting

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix System Requirements Notes on Transporting When transporting the printer, repack it using the The following system requirements are necessary to original box and packing materials to protect it from install and use the software for this printer. shock and vibration.

  • Page 149: Specifications Table

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Appendix Specifications Table Printer Specifications Humidity Operating: 20 to 80% (without condensation) Printer Specifications Storage (before unpacking): 5 to 85% (without condensation) Printing method On-demand ink jet Storage (after unpacking): 5 to 85% Nozzle configura- Black: 360 nozzles ×...

  • Page 150: Standards And Approvals

    (25˚C) for at least four hours (without condensation). (With optional Stand (24”): ❏ Do not refill the ink. Approximately 61 kg) *1 For information on HP-GL/2 and HP RTL, see the Epson website. Standards and Approvals *2 Paper basket closed. *3 Excluding ink cartridges.

  • Page 151: Where To Get Help

    Support Technical Support Web Before Contacting Epson Site If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting Epson’s Technical Support Web Site provides help with information in your product documentation, contact problems that cannot be solved using the Epson support services for assistance.

  • Page 152: Help For Users In North America

    Internet Support Help for Users in Australia Visit Epson’s support website at http://epson.com/ Epson Australia wishes to provide you with a high level support and select your product for solutions to of customer service. In addition to your product common problems. You can download drivers and...

  • Page 153: Help For Users In Singapore

    The more information you ❏ Product usage questions or problems prepare, the faster we can help solve the problem. This information includes your Epson product ❏ Enquiries on repair service and warranty documentation, type of computer, operating system, application programs, and any information you feel is required.

  • Page 154: Help For Users In Hong Kong

    603-56288222 Internet Home Page ❏ Enquiries on repair services & warranty, product Epson Hong Kong has established a local home page in usage and technical support (Techline) both Chinese and English on the Internet to provide users with the following information:...

  • Page 155: Help For Users In The Philippines

    - 6PM) Prefix local STD code Help for Users in the Philippines To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below:...

  • Page 156: Software License Terms

    Program (each is defined in Section 6) until five (5) years after the discontinuation of same model of this printer product. If you desire to receive the source code above, please see the “Contacting Epson Support” in the User’s Guide, and contact the customer support of your region.
  • Page 157 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms The list of LGPL Programs: uclibc-0.9.32 libusb-1.0.8 zeroconf 0.6.1-1 iksemel-rev25 e2fsprogs-1.41.14 Apache License This printer product includes the open source software program “Bonjour” which apply the Apache License Version2.0 (“Apache License Program”). Bonjour License This printer product includes the open source software program “Bonjour”...

  • Page 158: Bonjour

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms Bonjour This printer product includes the open source software programs which apply the Apple Public Source License Version1.2 or its latest version ("Bonjour Programs"). We provide the source code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer product.
  • Page 159 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms 1.8 "Source Code" means the human readable form of a program or other work that is suitable for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable (object code).
  • Page 160 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms 2.4 Third Party Rights. You expressly acknowledge and agree that although Apple and each Contributor grants the licenses to their respective portions of the Covered Code set forth herein, no assurances are provided by Apple or any Contributor that the Covered Code does not infringe the patent or other intellectual property rights of any other entity.
  • Page 161 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms 9. LIMITATION OF LIABILITY. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL APPLE OR ANY CONTRIBUTOR BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATING TO THIS LICENSE OR YOUR USE OR INABILITY TO USE THE COVERED CODE, OR ANY PORTION THEREOF, WHETHER UNDER A THEORY OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCTS LIABILITY OR OTHERWISE, EVEN IF APPLE OR SUCH CONTRIBUTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND...
  • Page 162 SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms 13.2 Relationship of Parties. This License will not be construed as creating an agency, partnership, joint venture or any other form of legal association between or among You, Apple or any Contributor, and You will not represent to the contrary, whether expressly, by implication, appearance or otherwise.

  • Page 163: Other Software Licenses

    SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide Software License Terms Other Software Licenses Info-ZIP copyright and license This is version 2007-Mar-4 of the Info-ZIP license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://www.info-zip.org/pub/infozip/ license.html.

This manual is also suitable for:

Surecolor sc-t7000Sc-t7000Sc-t7000 seriesSc-t5000 series

Table of Contents